Note: Please assemble the case before inserting the SD card!!!

User Manual

PI5-CASE-ARGON-NEO User Manual

Assembly Guide

How to Assemble PI5-CASE-ARGON-NEO Case

How to Assemble PI5-CASE-ARGON-NEO-M.2 Case

Software Setting

Program Bookworm System

Insert the TF card onto the PC and then click here to program the corresponding system imager.
After writing the image, save it and then remove the TF card.
Insert the TF card into the card slot after assembling the case.
Connect the matched power adapter to boot the system.
Note: Due to the case thickness, please ensure that the Type-C connector is fully inserted. Otherwise, poor contact at the Type-C interface will prevent the device from powering on normally.

Install ARGON NEO Power Button and Fan Control Script

Step 1: Configure EEPROM to Improve Power Supply and Boot From NVMe

Connect to the network, please ensure Raspberry Pi Time is updated and execute the following code at the terminal:

curl https://download.argon40.com/argon-eeprom.sh | bash
sudo reboot

Step 2: Install Argon Control Script and Config.txt Setting

Connect the network and execute the following code at the terminal:

curl https://download.argon40.com/argonneo5.sh | bash
sudo reboot

To modify the setting, you can input the following commands:

argonone-config

To delete the driver demo, you can input the following commands:

argonone-uninstall

Note: Please reboot the system to make the setting effective after modifying the configuration or uninstalling any items.

FAQ

Question:Can't recognize Argon NEO nvme?

Answer:

1. Check the hardware connection: please ensure that the PCIe cable is oriented correctly and fully inserted into the connector.

2. Check software driver: configure the EEPROM setting to improve the power supply and boot from NVMe.

Connect to the network and ensure that Raspberry Pi Time is updated and execute the following code at the terminal:

curl https://download.argon40.com/argon-eeprom.sh | bash
sudo reboot

Note: Please reboot the system to make the setting effective.

Question:What nvme drivers are supported?

Answer:

AData Legend 700
AData Legend 800
AData XPG SX8200 Pro
Axe Memory Generic Drive
Crucial P2 M.2
Crucial P3 M.2
Crucial P3 Plus M.2
Inland PCIe NVMe SSD
Kingston KC3000
Kioxia Exceria NVMe SSD
Kioxia Exceria G2 NVMe SSD
Lexar NM620
Lexar NM710
Netac NV2000 NVMe SSD
Netac NV3000 NVMe SSD
Origin Inception TLC830 Pro NVMe
Patriot P300
Patriot P310
PNY CS1030
Sabrent Rocket 4.0
Sabrent Rocket Nano
Samsung 980
Samsung 980 Pro (500GB/1TB)
Team MP33
Western Digital Black SN750 SE (Phison Controller)

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86 13434470212

Email: services01@spotpear.com

Argon-NEO-M.2-NVME-PCIE-Expansion-Board User Guide

PI5-CASE-ARGON-NEO