• sales

    +86-0755-88291180

PI4-CASE-ARGON-ONE

User guide


The fan and power button can only work with the driver. You can directly refer to the manual which comes with the case.

  • Open terminal of Raspberry Pi, install the driver by the following command
curl https://download.argon40.com/argon1.sh | bash
  • After installation, two shortcuts are added to the desktop, "configure" and "uninstall", they can be used to configure and uninstall the driver.
  • The default setting of the fan is:
CPU temperatureFan speed
55°C10%
60°C55%
65°C100%
  • You can also use commands to configure and uninstall driver
argonone-config  #configure driver
argonone-uninstall  #uninstall driver
  • Power button
Raspberry Pi statusButtonFunction
ShutdownPressStart
WorkingLong-press (>3s)Shutdown
WorkingPress(<3s)No function
WorkingDouble-clickRestart
WorkingLong-press(>5s)Force shutdown

TAG: Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter Raspberry Pi 5 Speaker RP2040 CM4 OpenWrt Tutorial Modbus RTU Industrial RS232 to RS485 Onboard ESP32-C6 Development Board ESP32 S3 AI 1.85 inch Development Board with 1.85inch LCD Touchscreen Round Screen Electronic Badge Deepseek Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times Python HTTP Request Communication Raspberry Pi 1.44inch LCD display HAT Raspberry Pi 5 PCIe TO Gigabit RJ45 ETH Adapter Board (C) Driver-Free RTL8111H For Pi5 Raspberry Pi Pico Buzzer Raspberry Pi CM5 Industrial Module 4G/5G/LoRa Gigabit Ethernet RJ45 Raspberry Pi 5 PCIe to M.2 NVME SSD And Gigabit Ethernet RJ45 HAT RTL8111H M_KEY For 2230/2242/2260/2280 Rockchip Computer Monitor Screen Jetson Nano Development Board 0.96inch1.3inch1.44inch1.8inch LCD Display Screen Round Arduino Raspberry Pi ESP32 Pico STM32 DDSM400 Direct Drive Servo Motor All-In-One Design Hub Serial -LIN Bus Motor