Raspberry Pi Zero USB Adapter User Manual User Guide

GUIDE (USE RASPBERRY PI ZERO)

3 After writing, append this line: dtoverlay=dwc2 to config.txt, which is in root directory of SD card.

4 Edit cmdline.txt file. Note that, all the statements in this file are set in the same line, do not change the format. Find rootwait, and inset this statement following it: modules-load=dwc2,g_ether


5 created a new txt file on root directory (BOOT) and named it ssh.

6 Insert the card to your Raspberry Pi and connect to PC. 

7 After booting（The green indicator will flash during booting, open Devices Manager. If the Raspberry Pi is designed as a COM device instead of RNDIS, you should first install the RNDIS driver

- https://www.waveshare.com/w/upload/7/7c/RPI_Driver_OTG.zip

7.1 Download the driver and extract it

7.2 right click the COM devices (The one Raspberry Pi recognized as) -> Update Drive->Browser my computer for driver software then choose the driver and update.

8 After installing, you can find that one RNDIS Gadget is recognized

9 Access Raspberry Pi via SSH with Putty software, IP: raspberrypi.local Port: 22


10 If there is error information prompt, search Bonjour software online and install

SHARE NETWORKIGN WITH PC
There is a method that you can share network of your PC with Raspberry Pi.

1. Open Control Panel -> Network and Internet -> Network and Sharing Center->Change adapter settings

2. Find the network your PC connect, right lick->Properties->Sharing. Check option that Allow other network users to connect through this computer’s Internet connection. Then select shared network 



3. Then try to ping a website on your Raspberry Pi.

Driver

• RPi OTG Driver
  

Software

• Panasonic SDFormatter
  
• Win32DiskImager
  
• PuTTY
  

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com