0.95inch RGB OLED (A)

Introduction

0.95inch RGB OLED, SPI interface, curved/horizontal pinheader

Resources

Question:

What is the electricity voltage of the system working with an OLED module?

Answer:

The OLED module should work at a system with 3.3V operation voltage. However, it can work properly at a system with 5V operation voltage as well, the aging test (more than 24 hours) shows.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： 7inch Monitor Display Image-Modulation-Tutorial User Guide Pi5 Pure- Raspberry Pi 5 USB Audio Raspberry Pi Raspberry Pi 5/4B easy Adapter Micro HDMI to HDMI 4K All Ports To Pi's USB Side NVIDIA-acess User Guide Dual-MCU-Board RP2040 Luckfox Pico SPI Raspberry Pi Pico 2 RP2350 ETH CH9120 TCP/UDP Ethernet Network For Arduino Raspberry Pi SpotPear Aluminum Heatsink Raspberry Pi 64MP Camera ESP32 UART USB Bus Servo ST RSBL Driver board For Raspberry PI Robot TTL UART To CAN ESP32 Thermal imaging pcb800099-v.9 RV1106 SC3336

0.95inch RGB OLED (A) User Guide

Introduction

Resources

To：

Email(support)

0.95inch RGB OLED, SPI Interface, Curved/Horizontal Pinheader