• sales

    +86-0755-88291180

Jetson Nano IMX219-77 Camera User Guide

Introduction

IMX219 Camera, 800 megapixels and 77 FOV. Compatible with Jetson nano. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare and the StereoPi board.

Hardware connection

  • Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
  • Connect a HDMI LCD to Jetson Nano

Software setting

  • Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
  • Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
  • If you find that the image captured is red. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz
tar zxvf Camera_overrides.tar.gz 
sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/
sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp
sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp


TAG: NVIDIA-acess User Guide TOF Time-Of-Flight Laser Range Sensor Radar Module UART / I2C Port Supports 6V~24V Solar Panel JETSON-NANO-MINI PC Monitor Screen SpotPear Raspberry Pi Zero 4G Cat1 With USB Hub Expansion Board LTE/GPS/EA/EU also For Zero 2W X1005 Raspberry Pi 5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2230/2242/2260/2280 ESP32 S3 Development Board 1.5 inch Round Rotary OLED TouchScreen Smart Knob Display 1.5inch Display 466x466 LVGL for Arduino PoE-M.2-HAT+B User Guide lilygo Raspberry Pi CSI-to-HDMI Jetson Orin 5G/4G/3G expansion board GNSS GPS RM520N-GL RISC-V Raspberry Pi 5 PCIe TO Gigabit ETH USB3.2 HAT+ USB HUB USB TO RS485 Raspberry Pi Transparent Screen Jetson 64MP Camera Raspberry Pi 5 PCIe to USB Gen1 HUB and M.2 NVMe SSD PI5 Expansion board HAT+ Raspberry Pi 4 USB Audio