• sales

    +86-0755-88291180

DC-BUCK-Adapter User Guide

Overview

Design for 7.2V SC series serial bus servo.

Introduction

  • 7.2V buck regulator, suitable for the servos such as SC15 Servo and SC09 Servo.
  • Mini size, more space-saving, easy to integrate into the projects.
  • 9~36V wide voltage input for more flexible project power selection.
  • Simply connect it in series in the servo circuit to use.

Parameters

  • DC IN: 9~36V
  • DC OUT: 7.2V
  • Interface: 5264-3P
  • Peak Current: 3A
  • Mounting hole diameter: 2.70mm
  • Dimensions: 21.50*34.00mm

Application Scenarios


In the above figure, General Driver for Robots is powered by the XH2.54 interface of the UPS Module 3S. The DC BUCK Adapter (7.2V) is connected between the General Driver for Robots and the servo, and then 12.6V is lowered to 7.2V, providing more flexible power supply options for you.

Resource

TAG: ESP32-C5 Mini Development Board based on ESP32-C5-HF4 dual-core processor Arduino 0.96inch RGB OLED ESP32‑S3 13.3-inch E6 Full-Color E-Ink e-Paper Display Tang-Nano-20K-FPGA-Unboxing SpotPear ESP32 C6 Development board 1.9 inch LCD display 1.9inch Screen 172×320 With SD slot RGB LED QMI8658 6-Axis-Sensor ST7789 CST816 spotpear EoAT Setting Sipeed RISCV LicheeRV Nano Super-Mini SG2002 AI RAM-256MB ESP32 P4 Development Board 7-inch LCD Display 1024×600 7inch Touchscreen ESP32-C6 WiFi6 AI Deepseek ESP32-S3 1.28inch Round LCD Display Screen Module Development Board GC9A01A QMI8658A With Case ESP32-S3 1.43inch AMOLED Display AI Development Board 466×466 1.43 inch TouchScreen Deepseek Raspberry Pi 500 (US) refined personal computer.built into a high-quality Keyboard ESP32 C6 Development Board 1.47 inch LCD Touch Screen 1.47inch Display 172×320SD AXS5106L JD9853 Raspberry Pi 5 Official Original AI Kit Hailo8l 13Tops/26Tops PCIe M.2 HAT+ Board For Pi5 Raspberry Pi Mipi 101M-8001280-IPS-CT-K User Guide Arducam 64MP Camera Raspberry Pi 5 PoE MINI HAT(G) Power over RJ45 Ethernet 802.3af/at Moudle for Pi5 Sipeed NanoKVM Cube KVM HDMI Remote OS Control Manager Install /Power Control /Remote Desktop Server UART