Pi HEATSINK BRACKET User Guide

Note: Do not include Raspberry Pi 4B, Please Buy alone.

Overview

This is an aluminum alloy self-heating heat sink, which can be equipped with a cooling fan, which is specially used for heat dissipation of motherboard chips such as Raspberry 3B/3B+/4B.
It is made of imported high-quality pure aluminum, and it can control the heat generated by the chip when the motherboard is working and cooling it.
Keep the operating temperature of the motherboard below the normal value and run stably, so as to prolong the service life of the motherboard.

Features

Material: aluminum Case
Three colors available: Silver/Black/Golden
Hole position and appearance: Fans can be installed, easy to install, light and beautiful
Supported devices: suitable for Raspberry Pi 4B/3B/3B+

Installation mode

Fan installation

Outline Dimensions

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 5 PCIe to USB3 HUB Double 2.5G ETH RJ45 and M.2 NVMe SSD PI5 Expansion board HAT+ RP2040-Keyboard-3 SC09 Serial UART Bus Servo Motor Switchable 2.3kg 300Angle Raspberry Pi 0.96inch OLED Jetson Orin Nano UGV Beast PT ROS2 AI OpenCV Robot Car MediaPipe Arducam Raspberry Pi 5 PCIe USB HUB 3.2 Gen1 HAT+ High Speed Pi5 Cortex-A7 Pi5 Power Raspberry Pi Secondary Screen EyeLink-RC-S1 Industrial Edition 5.5 inch Touchscreen Camera R1M Card Recording Flight Controller FPV Drone ground station image transmission remote Raspberry Pi 5 UART To Ethernet USB Monitor Raspberry Pi Pico 2 RP2350 1.47 inch LCD Display Development board RP2350A 1.47inch Screen RGB color $8.5 ADXL354C R7FA4 Plus A Board Based on R7FA4M1AB3CFM Compatible with Arduino UNO For R4 Minima Raspberry Pi Pico Display Raspberry Pi Mipi display 7inch-USB-Monitor user guide