Raspberry Pi ZERO to PI3 Adapter (B) User Guide

Introduction

Onboard 4-ch USB interface, Fast Ethernet port and HDMI port, Raspberry Pi Zero 2W To 3B Adapter is an alternative for Raspberry Pi 3 Model B/B+, supporting Zero 2W but not Zero.

Features

Zero 2 w:

• Broadcom BCM2710A1, Quad Core 64-bit SoC (Arm Cortex-A53 @ 1GHz).
  
• 512MB LPDDR2 SDRAM.
  
• 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE.
  
• Onboard 1 Mirco USB 2.0 port with OTG.
  
• Onboard Raspberry Pi 40 Pin GPIO interface pad, suitable for Raspberry Pi series expansion boards
  
• MicroSD card slot.
  
• Mini HDMI output interface
  
• Composite video interface pads, and reset interface pads.
  
• CSI-2 Camera Interface.
  
• H.264, MPEG-4 encoding (1080p30); H.264 decoding (1080p30).
  
• Support OpenGL ES 1.1, 2.0 graphics.
  

Expansion board:

• Adopt the pogo pin into the Zero board, which can be inserted directly and conveniently.
• Its interfaces are easily compatible with the Raspberry Pi 3B series (3B / 3B+) board.
• The module has an onboard USB audio headphone port and an additional speaker port.
• Onboard 4-way USB expansion port, compatible with USB 2.0 / 1.1 transmission.
• Onboard RTL8152B Ethernet chip, support 1 RJ45 network port, 10/100M self-adaptive.
• Only supports Zero 2 w, not compatible with Zero generation.

Schematic

• Schematic

Raspberry Pi Zero W Document

• Raspberry Pi Zero 2 W Introduction
• Raspberry Pi Zero 2 W Schematic
• Raspberry Pi Zero 2 W Dimensions
• Raspberry Pi Zero 2 W Test Introduction
• RPI Official Links

Software

• Panasonic_SDFormatter
• Win32DiskImager
• putty

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com