PCIe-TO-PCIe x1-Board-C User Guide

Overview

PCIe FFC connector to standard PCIe x1 slot adapter board (c) for raspberry pi 5, compatible with PCIe x1, x4, x8, and x16 interface devices

Features

PCI-E×1 connector with slot on the back, compatible with PCIe x1 x4 x8 x16 devices
Only supports PI5B
Onboard working indicator, PWR stays on when powered on
Onboard DC power supply, can be powered by DC round hole or through 4PIN connector

Usage Instructions

Hardware Connection

Pay attention to the direction of the wiring, if the PCIe slot is connected in the wrong direction, the PCIe card will be damaged, as shown in the figure:

Boot PCIe

1. Enable PCIE interface

PI5B defaults to enabling the PCIE interface.
If it fails to boot, add the following to /boot/firmware/config.txt:
dtparam=pciex1

2. PCIE is gen2 by default, if you need to enable PCIE gen3, then add following to /boot/firmware/config.txt:

dtparam=pciex1_gen=3

Resources

FAQ

Question: Can it work without 12V power supply?

Answer:

Whether or not to supply 12V is related to the PCIe card used. Most of them do not require 12V power supply, and need to be directly supplied to the PCIe card, instead of supplying 12V to the board.

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86 13434470212

Email: services01@spotpear.com

TAG： Jetson Milk-V Duo S 512MB SG2000 RISC-V Product Tutorial Catalog How to use host device Arduino IR Thermal Imaging Camera 0.96inch RGB OLED Gripper Serial Robotic Arm Gripper Mechanical claw Serial Bus Servo ST3215/CF35-12 Spotpear Pi 5 PCIe to M.2 Raspberry Pi 5 RTC charge Luckfox Pico plus Raspberry Pi 5 Official Red-White Case DeepSeek XiaoZhi AI Voice Chat Robot BOX ESP32-S3 Development Board 1.85 inch Round LCD N16R8 GPS LCD Driver Board ESP32 1.9 inch LCD Capacitive TouchScreen 1.9inch Display ST7789 170x320 for Arduino /Raspberry Pi /Pico SpotPear LuckFox 10-Axis DOF ROS IMU (A) Sensor UART ARM 32 DSP Processor BLE 5.3 Bluetooth / Accelerometer / Gyroscope / Magnetometer / Temperature & Pressure Industrial Modbus RTU Dual Ethernet RJ45 To 8ch POE ETH Relay (C) PoE Power over Ethernet Raspberry Pi ZERO ESP32 Thermal imaging

Price：

$11.9

Model：

PCIe TO PCIe x1 Board (C)

Raspberry Pi 5 PCIe FFC Connector to Standard PCIe x1 Slot (C) Expansion Board

[Tutorial Navigation]

Overview

Features

Usage Instructions

Hardware Connection
Boot PCIe

Resources
FAQ

Question: Can it work without 12V power supply?

Support