• sales

    +86-0755-88291180

ESP32-S3-Relay-6CH-Program modification

Program Modification

  • In each example, there is a WS_Information.h file, please modify the file content to user information
  • Take the MAIN_ALL as an example


  • Open the WS_Information.h file


  • Change Waveshare-TL and waveshare to the name and password of the WiFi you want to connect to
  • If the Wi-Fi name to connect is Waveshare-WIFI and the password is 123456789, then modify them to the following


  • If you need to use Waveshare Cloud for relay control, you need to create a device on Waveshare Cloud first
  • Modify relevant data based on device details on the Waveshare Cloud


  • The modifications are as follows


TAG: Industrial UART USB TO 8CH RS485 Isolated Converter For 35mm standard rail and stacked installation USB To CAN FD Raspberry Pi PICO LoRa Raspberry Pi 5 SPI Communication Industrial 4-ch RS485 DC Detection Module Modbus RTU DIN Rail BPI Raspberry Pi 8.8 inch DSI MIPI Display LCD Capacitive TouchScreen 480x1920 Raspberry Pi 3.5 inch DSI Display MIPI LCD (H) Capacitive TouchScreen 480x800 Spotpear SC servo driver ESP32 S3 Development Board 1.85 inch Round LCD Display 360×360 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino Raspberry Pi Starlight Camera IR-CUT IMX462 (A) Sensor 2MP 90 Degree SpotPear ESP32-P4-WIFI6 4.3inch LCD Display AI Development Board 480×800 4.3 inch TouchScreen Deepseek ESP32 1.9inch LCD Raspberry Pi 5 Audio hat Industrial-grade isolated 2-way RS485 hub repeater One RS485 TO Two RS485 Raspberry Pi 3.97 inch e-Paper link BW 800x480 For Arduino / Jetson / STM32 /ESP32 Raspberry Pi Monitor Official Original DisplayScreen 15.6 inch LCD Full HD 1920x1080 15.6inch