Onboard High-Speed USB2.0 Interface And 2-Ch CAN/CAN FD Bus Interfaces, Support Bi-Directional Transmission, Can Work Independently Without Interfering With Each Other

Programmable Baud Rate, Automatic Detection
CAN Baud Rate Is Configurable In The Range Of 100Kbps~5Mbps
Supports Baud Rate Calculation, Auto-Detection, And Setting Via The Configuration Tool

Supports Decoding And Analyzing For
Multiple CAN Protocols
Supports CAN 2.0A, CAN 2.0B, ISO11898-1, And CAN FD Protocol Specification V.1.0, Supports Standard And Extended Frames

Supports Multi Development Environments
Provides Examples For Secondary Development Projects On Various Mainstream Development Platforms: C#, VC, Delphi, Qt, LabVIEW, Python/Python-Can

High-Performance Hardware Solution
Adopts Original Controller And 32-Bit MIPS M4K Core, Up To 80MHz Frequency, With High Performance, Stable And Reliable

With Electrical Isolation And Multiple
Protection Circuits
Adopts High-Speed Signal Isolators, DC-DC Dual Power Isolation, USB, CAN1 And CAN2 Three-Terminal Full Isolation, Higher Communication Security And Stability

One PC With Multiple Devices
Supports one PC to run multiple CAN FD analyzers at the same time without interfering with each other, up to 128 devices after testing. It is suitable for monitoring multiple CAN networks at the same time with one monitoring device, or for data comparison and verification and so on.

Interface Introduction

Application Scenarios

Application Example

* for reference only, the Raspberry Pi 4B and 2-CH CAN FD HAT are Not included.
Product Show

Outline Dimensions