1.47 inch Touch LCD with expansion board

Built-in JD9853 driver chip and AXS5106L capacitive touch chip

Provides examples for Raspberry Pi, ESP32S3, Pico, Arduino, etc.

Features

• 172 × 320 resolution, 262K color, can clearly display color images
• The touch screen has high transmittance, fast response and long life
• Built-in JD9853 driver chip and AXS5106L capacitive touch chip, using SPI and I2C interface communication respectively, which does not occupy too many interface pin resources, and can be connected to Raspberry Pi / ESP32S3 / Pico / Arduino
• Provides examples for Raspberry Pi, ESP32S3, Pico, Arduino, etc.

  Product Parameters

  Voltage	3.3V / 5V	Resolution	172 × 320 pixels
  Display chip	JD9853	Touch chip	AXS5106L
  Display Interface	4-wire SPI	Touch interface	I2C
  Display Panel	IPS	Touch Type	Capacitive induction
  Display size	17.75 ×32.93(mm)	Product size	22.05 × 41.69 (mm）

  Onboard level conversion chip

  Compatible with 3.3V / 5V power input

  

  VCC	Power supply positive (3.3V / 5V power input)
  GND	Power Ground
  MISO	SPI Communication MISO Pin
  MOSI	SPI communication MOSI pin
  SCLK	SPI Communication SCLK Pin
  LCD_CS	LCD chip select pin, low level is effective
  LCD_DC	LCD data/command pin, low level indicates command, high level indicates data
  LCD_RST	LCD reset pin, low level is effective
  LCD_BL	LCD backlight pins
  TP_SDA	TP data pin
  TP_SCL	TP clock pin
  TP_INT	TP interrupt pin
  TP_RST	TP reset pin, low level is effective

  Hardware connection diagram

  Connect to the Raspberry Pi motherboard

  
  

  Connecting to ESP32-S3

  

  The pictures are for display only. Please refer to the configuration list for detailed configuration.

  Product size

  
  

1.47inch-Touch-LCD

1.47inch-Touch-LCD-With-ESP32S3-Board

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com