• sales

    +86-0755-88291180

ESP32 C3 0.42LCD web WIFI

1、 Open the arduino IDE

2、 Select Chip

2.1. Click on tools

2.2. Click on board

2.3. Click on esp32 and select esp32-c3

3、Substitution code burning

#include<WiFi.h>

// Enter your WiFi SSID and password

charssid[] ="iPhone";// your network SSID (name)

charpass[] ="8888888888";// your network password (use for WPA, or use as key for WEP)

intkeyIndex =0;// your network key Index number (needed only for WEP)

intstatus = WL_IDLE_STATUS;

// if you don't want to use DNS (and reduce your sketch size)

// use the numeric IP instead of the name for the server:

//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)

charserver[] ="wifitest.adafruit.com";// name address for adafruit test

charpath[]   ="/testwifi/index.html";

// Initialize the Ethernet client library

// with the IP address and port of the server

// that you want to connect to (port 80 is default for HTTP):

WiFiClient client;

voidsetup(){

//Initialize serial and wait for port to open:

Serial.begin(115200);

while(!Serial){

;// wait for serial port to connect. Needed for native USB port only

}

// attempt to connect to Wifi network:

Serial.print("Attempting to connect to SSID: ");

Serial.println(ssid);

WiFi.begin(ssid, pass);

while(WiFi.status()!= WL_CONNECTED){

delay(500);

Serial.print(".");

}

Serial.println("");

Serial.println("Connected to WiFi");

printWifiStatus();

Serial.println("\nStarting connection to server...");

// if you get a connection, report back via serial:

if(client.connect(server,80)){

Serial.println("connected to server");

// Make a HTTP request:

client.print("GET ");client.print(path);client.println(" HTTP/1.1");

client.print("Host: ");client.println(server);

client.println("Connection: close");

client.println();

}

}

voidloop(){

// if there are incoming bytes available

// from the server, read them and print them:

while(client.available()){

charc =client.read();

Serial.write(c);

}

// if the server's disconnected, stop the client:

if(!client.connected()){

Serial.println();

Serial.println("disconnecting from server.");

client.stop();

// do nothing forevermore:

while(true){

delay(100);

}

}

}

voidprintWifiStatus(){

// print the SSID of the network you're attached to:

Serial.print("SSID: ");

Serial.println(WiFi.SSID());

// print your board's IP address:

IPAddress ip =WiFi.localIP();

Serial.print("IP Address: ");

Serial.println(ip);

// print the received signal strength:

longrssi =WiFi.RSSI();

Serial.print("signal strength (RSSI):");

Serial.print(rssi);

Serial.println(" dBm");

}

1. Copy the code into the Arduino IDE

2. Use a type-c cable to connect the computer to the ESP 32-c3 development board. After successful connection, the serial port will be displayed in the computer management window

3.Click on Tools in the Arduino IDE, then click on Port and select the serial port Adafruit QT ESP32-C3

Click on Verify

5.Click on upload

6.The test results are as follows


TAG: ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino Raspberry Pi 21.5 inch Type C/HDMI Display Screen 1920x1080 Computer PC Phone Xbox/PS4/Switch ESP32 S3 LCD Development Board 1.3 inch Display 1.3inch Screen ST7789 240x240 Mini TV SD-Port QST QMI8658 Gyro Sensor LVGL For Arduino DeepSeek ESP32-S3 Voice Chat Robot espHome XiaoZhi Ball Jetson Orin 4G/3G/2G expansion board GNSS GPS SIM7600G-H-M.2 Allwinner Raspberry Pi LCD Milk-V Duo 1.14inch LCD Jetson Orin Rasberry Pi 5 PCIe TO MiniPCIe 4G Gigabit Ethernet RJ45 USB HUB HAT+ SIM7600G-H/EG25-G Raspberry Pi 5inch Display 1024x600 HDMI Capacitive TouchScreen 5 inch LCD B Wide-Cover For Mini PC Raspberry Pi 5 TTL ISX031C GMSL Camera H100 Image Sensor IP67 protection rating For Jetson Orin And MAX9296 GMSL camera ESP32-S3FH4R2 Matrix 8x8 RGB-LED-WiFi Bluetooth QST Attitude Gyro Sensor QMI8658C Arduino Python Raspberry Pi MLX90641 UNO Minima RA4M1 ZERO Tiny SuperMini R7FA4M1 Board Compatible With R4 For Arduino ESP32 LVGL ESP32 S3 LCD Camera Development Board 2 inch Display QMI8658 Sensor / Battery Port LVGL/HMI For Arduino PC U