• sales

    +86-0755-88291180

Raspberry Pi Compute Module 3+ Lite User Guide

Overview

The CM3+/Lite Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM). It's the lite version without onboard eMMC Flash.

This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.

TAG: Raspberry Pi Pico Display Modbus-Protocol-Specification User Guide UGV Beast PT Kit AI OpenCV Robot Car MediaPipe For Jetson Orin ESP32 P4 Development Board WIFI6 4 inch LCD Round Display 4inch TouchScreen 720×720 Dual Microphones VGA to LVDS ESP32-S3 Relay 6-Channel IOT WiFi Bluetooth RS485 Pico Protection Circuits Jetson Nano Expansion Board Pi5 Pure-Copper Active Cooler Industrial Isolated Converter Serial Bus Servo Raspberry Pi 5 PD Induction Luckfox Pico plus RP2040 Camera Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT Raspberry Pi 500 (US) refined personal computer.built into a high-quality Keyboard Retail electronic Tag MAX9296 GMSL Camera Adapter Board 2-Ch High-Speed And Low-Latency Transmission For Jetson Orin Nano/NX Install Espressif IDF Plugin Tutorial User Guide ESP32 MLX90640 Jetson Nano Development