• sales

    +86-0755-88291180

Raspberry Pi X705-Expansion-Board User Guide

Overview

The X705 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X705 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X705 can also be used with the X820 (2.5" HDD/SSD Shield), X850 (MSATA SSD shield), X822.

Features

  • Smart Uninterruptible Power Supply (UPS)
  • Out 5.1V Max. 8000mA Power Backup for even the most demanding Raspberry Pi set ups
  • Supports 2A via micro-USB socket or 3A via DC jack fast charging
  • Can work with single or dual 18650 Lithium Ion battery
  • Integrated battery protection circuit
  • Integrated over current protection and over voltage protection
  • Integrated 10-A fully-integrated synchronous boost converter
  • Intelligent automatic charging and discharging
  • On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
  • On-board red LED show the status of battery charging or fully charged
  • On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
  • On-board pin header allows to select AUTO power-on when power supplied or battery installed
  • Ultra-low standby power consumption of μA to maximize battery life
  • On-board blue LED shows the status of power on/off
  • Powers the Raspberry Pi via the 40-pin header - simple cabling required
  • Allows power input via DC jack or Micro-USB socket or XH2.54 connector
  • On-board XH2.54 power output connectors allow to power other devices
  • On-board XH2.54 power input and output connectors allows to integrate with your products
  • DON'T supports software safe shutdown.

Technical Specification

  • Power supply: via Micro-USB socket : 4.7~5.5Vdc, 2.5A; Via DC power jack : 4.7~5.5Vdc ±5%, ≥4A
  • UPS output : 5.1V ±5% Max 8A
  • UPS charging current: 2A via Micro-USB socket, 3A via DC jack
  • Terminal Battery Voltage : 4.2V
  • Recharge Threshold : 4.1V

WARNING:

DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET.

DO NOT APPLY POWER TO X705 VIA THE MICRO USB SOCKET AND DC JACK AT THE SAME TIME.

DO NOT USE 18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT

TAG: Raspberry Pi WatchDog HDMI to LVDS MPTPU Raspberry Pi 5 TPU AI Kit 2TOPS PCIe to TPU HAT Pi5 For Google Coral Edge TPU WiFi Wireless ESP32 DDSM Motor Driver HAT For Direct Drive Servo Hub Motors For Raspberry Pi RP2040 Camera ESP32-S3 SIM7670G 4G Development Board With Camera LTE Cat-1/4G/GNSS/GPS Global Band Portable WIFI PI5 Type-C Power Adapter Industrial USB HUB USB3.2 Gen1 One-To-4U Onboard 7~36V DC power port For Multi Systems Raspberry Pi 1.54inch LCD Bookworm-Desktop Display and Touch Arducam Raspberry-Pi-Pico-W-webserver Intel BE200 Wireless WLAN Card Gigabit Tri-Band WiFi7 Bluetooth 5.4 M.2 MU-MIMO IEEE 802.11 0.85inch Display Raspberry Pi Pico 2 RP2350 ETH CH9120 TCP/UDP Ethernet Network For Arduino ESP32 S3 Development Board 1.43 inch AMOLED Display 1.43inch TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor SpotPear Serial Bus Servo Raspberry Pi Secondary Screen PC Secondary Screen