• sales

    +86-0755-88291180

Raspberry Pi【Zero_LCD_HAT_A】-【1.3inch LCD-ST7789】- Display

Step 1】
Copy the file "lcd1inch3_ST7789.dtbo" to the "/boot/overlays/" folder.

Step 2】
Configure the "/boot/config.txt" file

Disable KMS:

Add the following content to the bottom:

dtparam=spi=on

dtoverlay=lcd1inch3_ST7789:rotate=0

#dtoverlay=lcd1_3inch_ST7789:rotate=0

hdmi_force_hotplug=1

max_usb_current=1

hdmi_group=2

hdmi_mode=87

hdmi_cvt 480 480 60 6 0 0 0

hdmi_drive=2

display_rotate=0

dtoverlay=dwc2,dr_mode=host



Step 3】
Compile and install the fbcp software.

Download the git project for fbcp.

gti clone https://github.com/tasanakorn/rpi-fbcp.git

Install cmake:

sudo apt-get install cmake

Compile fbcp:

cd ./rpi-fbcp/

sudo mkdir ./build

cd ./build

sudo cmake ..

sudo make

Install fbcp:

sudo install ./fbcp /usr/local/bin/fbcp

Step 4】
Enable auto-start for fbcp software on boot:

sudo nano /etc/rc.local

Add the following two instructions below:

sleep 20

fbcp &



Step 5】
Restart the system:

sudo reboot

TAG: DDSM315 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor Raspberry Pi 5 Speaker ESP32 P4 Development Board WIFI6 4 inch LCD Round Display 4inch TouchScreen 720×720 Dual Microphones GPU Monitor Display ISX031C GMSL Camera H100 Image Sensor IP67 protection rating For Jetson Orin And MAX9296 GMSL camera DPI Interface X1012 Raspberry Pi 5 POE And PCIe to M.2 NVMe SSD Board Pi5 2280 Power over Ethernet Luckfox ESP32-S3 Industrial 8-CH Relay IOT LAN WiFi /Bluetooth /RS485 /RJ45 Ethernet /POE SpotPear Raspberry Pi Touch Display 2 Official Original Capacitive TouchScreen 7 inch LCD TFT 720x1280 Industrial USB TO RS485 2CH Converter FT2232HL Grade Isolated spotpear Raspberry Pi RP2040 Long-Rang AV to LVDS spotpear 64MP Camera Raspberry Pi display Modbus POE ETH Relay MQTT User Guide Jetson Nano Heatsink