Raspberry Pi Environment Setting Tutorial

Install the Script

Script installation requires a good network environment, otherwise it may cause installation failure.

Get the Script

cd ~
wget https://raw.githubusercontent.com/raspberrypi/pico-setup/master/pico_setup.sh

Run the Script

chmod +x pico_setup.sh
./pico_setup.sh

Reboot

sudo reboot

Manual Installation

Download the Related Compilation Libraries

sudo apt update
sudo apt install cmake gcc-arm-none-eabi libnewlib-arm-none-eabi build-essential -y
sudo apt install automake autoconf build-essential texinfo libtool libftdi-dev libusb-1.0-0-dev -y

Download the Compressed Package and Unzip

cd ~
sudo apt-get install p7zip-full -y
wget https://github.com/EngineerWill/Pico-lib/releases/download/v1.0/Pico-lib.7z
7z x ./Pico-lib.7z

Install Openocd (Optional)

cd ~/pico/openocd/
./bootstrap
./configure --enable-ftdi --enable-sysfsgpio --enable-bcm2835gpio
make -j4
sudo make install

TAG： ADXL354C Sensor Sipeed FPGA Tang Primer 20K Dock/Lite 128M DDR3 Development Board GW2A-LV18PG256C8/I7 USB To CAN Milk-V Duo RJ45 Raspberry Pi 5 Audio Jack spotpear ESP32 1.9inch LCD ESP32 Allwinner H618 EG25-G Mini PCIe SIMCom Original 4G LTE Cat-4 Module Global Coverage GNSS PCI Express Mini Card Mechanical Keyboard Raspberry Pi Camera OV5647 Camera (F) Bus servo driver board Smart Car Metal Case ESP32 ST7789 Sensor Raspberry Pi Pico 10.1inch DVI LCD Gyroscope Sensor RP2040-Keyboard-3

Pico-Get-Start-RPI