The VS1053 audio decoding module can not only play various music formats, but also supports OGG real-time encoding and recording.
MP3 development adopts AVR processor, and SPI interface is reserved on the board, which is convenient for connection and use.
Specifications
Provide SPI interface, control signal line leads
Headphone and speaker output interface x1
Microphone for recording x1
1ine_in input interface x1
Power Indicator
Working voltage: DC 5V, capacitor filter
3.3V and 1.8V LDO chip AMS-1117 on the carrier board, providing a maximum current of 800mA
Crystal oscillator frequency: 12.288MHz
Interface Description
HJ: 3.5mm headphone jack interface
MC: Pickup mic available for recording
LINE IN: Input mode selection, used to select the audio source for ADPCM recording,
If it is 0, the microphone input pins MICP and MICN are used,
If 1, LINEIN is used
SPI: SPI download interface
To:
Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!