Raspberry Pi Zero-to-CM3-Adapter User Guide

Introduction

Zero 2 W to Compute Module 3 only supports Zero 2 w but not the first generation Zero.

Onboard Resource Comparison

Onboard Resource
Zero-to-CM3-Adapter	Zero 2W
HDMI	HDMI
GPIO0~27	GPIO0~27
GPIO44, GPIO45	GPIO44（SDA0), GPIO45（SCL0）
GPIO32, GPIO33	CAM_GPIO0, CAM_GPIO1
GPIO28~31, GPIO34~43	NC
CSI0	NC
CSI1	CAM
DSI0	NC
DSI1	NC
USB2.0	USB2.0
SDIO	SDIO

Onboard Resource

Camera interface: for connecting to the CAM of zero 2w.
USB pogo pin: used to connect the USB signal line of zero 2w.
HDMI interface: used to connect the HDMI of zero 2w.
Micro SD card interface: used to lead out the data cable of the SD card in Zero 2 w.
GPIO: connect to the 40Pin pin of zero 2w, and lead to GPIO0~27.

Schematic

Schematic

Raspberry Pi Zero 2 W Documents

Software

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 5 Modbus RTU 8-ch Relay Module (D) MLX90641 ESP32 C3 1.44inch LCD 0.99inch Raspberry Pi Camera V1 FT4232HL USB TTL RS232 Industrial UART 4-Ch UART Spotpear Raspberry Pi 5 RTC UART Laser 450nm 5W high precision module Adjustable focal length For Laser Carving / Laser 3D Printing GC9A01 Milk-V Duo Ethernet 10-Axis DOF ROS IMU (A) Sensor UART ARM 32 DSP Processor BLE 5.3 Bluetooth / Accelerometer / Gyroscope / Magnetometer / Temperature & Pressure Jetson Orin electronic Tag JETSON NANO Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT ESP32-S3-Zero Raspberry Pi 5