Raspberry Pi Official Original POE Plus HAT Injector 30W Power Over Ethernet 802.3af/at For Pi5 Onboard RGB LED For RJ-45 EIA 568A/568B Port

Raspberry Pi Official Original POE Plus HAT Injector 30W Power Over Ethernet 802.3af/at For Pi5 Onboard RGB LED For RJ-45 EIA 568A/568B Port

$34.9

Brand：SpotPear

SKU：010313200000

Date：2025-04-02 16:47

Part Number：

Raspberry Pi PoE+ Injector

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

Raspberry Pi PoE+ Injector Add PoE capability to non-PoE switch ports

Raspberry Pi Original PoE+ Injectors

Single port 30W output, supports IEEE 802.3af/at network standards

PoE HAT for all Raspberry Pi

Product Parameters

Input voltage	100V ~ 240V AC
PoE power output pin	4/5 (+)，7/8 (–)
Output Power	30W
PoE rated output voltage	55V DC
Supported interface types	RJ-45，EIA 568A，EIA 568B
Protocol Standards	IEEE 802.3af/at PoE Ethernet
rate	10 / 100 / 1000 (Mbps)
LED indicators	PoE Power indicator
Operating altitude	-300m to 3000m
Mean time between failures	200000 hours, 25℃
Operating temperature / humidity	-10℃ ~ +50℃ / 90%
Storage temperature / humidity	–20℃ ~ +70℃ / 95%
Product size (Length × Width × Height)	159 × 51.8 × 33.5 (mm)

With LED indicator

It is always on when connected to a powered device and flashes when not connected to a powered device.

Example usage scenarios

The pictures are for display only. Please refer to the configuration list for detailed configuration.

Product size

[] Raspberry Pi PoE+ Injector

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!