Raspberry Pi / Jetson Nano USB TO AUDIO User Guide

This is a USB sound card, support recording and playback, stereo codec, built-in microphone, and speaker. It is suitable for Raspberry Pi/ Jetson Nano. driver-free, plug, and play.

Features

• Onboard Power indicators for checking working status.
• Onboard microphone and speaker, support audio input/output
• Driver-free, plug, and play. Compatible with Windows, Mac OS, Linux, and Android.
• Standard USB 2.0 port, portable size.

Specification

• Power voltage：5V
• Audo Encoder/Decoder：SSS1629A5
• Control port：USB
• Audio port：PH2.0
• Seakper driver：2.6W per channel (4Ω BTL)

Working with Raspberry Pi

Hardware configuratoin

• Raspberry Pi x1
• USB TO AUDIO
  

Hardware connection：

Play and record

• Right-click the Audio logo of Raspberry Pi ->Choose USB PnP Audio Device->Play or recording

Configure volume

• Right-click USB Device Settings->The left spider is the volume of the speaker and the right one is microphone.

Working with PC

• Connect the USB TO AUDIO to PC and it will be auto-recognized as a USB audio device.
  

• Open the Control panel. choose Hardware and Sound-> Sound -> Recording and a USB microphone is listed.
  

• Connect speaker to the USB TO AUDIO , please keep the speaker away from the USB TO AUDIO module
  

Right-Click Microphone -> Properties -> Listen and set it as below:

• Try to say to the microphone and check if the speaker works normally. Please keep the speaker away from the USB TO AUDIO Module, or it causes echo problem.

Resources

• APA2068KAI-TRG
  
• SSS1629A5
  

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com