Raspberry Pi X6000-8.0CH-HiFi-HAT User Guide

For Use With

-	Raspberry Pi B+/2/3

Operating System


-	OSMC - 8-channel L/R audio outputs
-	Moode Audio Player - 8-channel L/R audio outputs
-	Raspbian Jessie - 8-channel L/R audio outputs
-	Openelec - 8-channel L/R audio outputs
-	Rune audio - 8-channel L/R audio outputs
-	Pi Core Player - To be tested

Key Features


-	Ultra-compact chassis
-	Ideal for car audio entertainment
	Ideal for stage audio systems
-	Ideal for multi-channel audio systems
-	8-channel stereo audio outputs at the same time even if playing 2-channel audio
-	Used four ESS Tech Sabre premier stereo DACs ES9023
-	ES9023 delivers jitter-free studio quality audio with 112dB DNR
-	Each DAC has independent ultra-low-jitter clock generator
-	Used the Texas Instruments ultra-low-noise voltage regulator
-	Supports up to 1TB 2.5-inch SATA hard drives
-	High quality video performance
-	Supports SPDIF Optical Digital Audio
-	Supports HDMI high-bit-rate (HBR) audio
-	4 analog stereo 3.5mm jack outputs
-	Selected high quality components (Solid Capacitors, Murata MLCC etc)
-	Allows you to split the audio stream from a HDMI signal
-	No HDMI output connection is required to receive audio at the analog and optical outputs
-	Connects directly to the Raspberry Pi - no additional cables needed
-	Powers the Raspberry Pi - no additional power supply
-	Lighted power switch
-	Raspberry Pi status LEDs still visible
-	Access to Raspberry Pi GPIO
-	Easy to change the Raspberry Pi OS SD card - No need to open the case
-	Easy DIY with Raspberry Pi

Power Supply Unit
(Optional Accessories)

-	AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
-	With 2 snap-in plugs for North America (US) and Europe (EU)
-	DC Power Plug Size : 5.5*2.5mm

Specification


-	Power supply: +5Vdc +/-5%
-	Input Ports: 1 x HDMI
-	Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
-	Analog audio output level: 2V RMS
-	Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
-	HDMI Audio Format: LPCM 8.0CH
-	Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
-	Size 122mm x 90mm x 90mm

Notes


-	For use with original power supply unit only
-	WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
-	Approx 3 seconds delay to turn on Raspberry Pi after power applied. (The powerful HDMI audio processing chipset needs time to bootup)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Jetson Orin Case ESP32-S3 1.28inch Raspberry Pi 5 Arduino Thermal imaging camera LuckFox Pico pro Milk V Duo PCB800099 RV1103 SC3336 UART Serial TTL To RS232 B Built-In Protection Circuits Rail-mount Industrial Isolated Converter MPS2280D Raspberry Pi 5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2280 Arducam Jetson Nano 3G module ESP32-S3N8R8 7inch LCD Display TouchScreen 800&amp;amp;amp;amp;times;480 WiFi Bluetooth CAN RS485 Sensor Milk-V Duo S eMMC version firmware burning Changeable Photo Raspberry Pi RTC WatchDog ESP32-S3 Relay 6-Channel IOT WiFi Bluetooth RS485 Pico Protection Circuits Raspberry Pi 5 Heatsink 1.5inch LCD

Raspberry Pi B+/2/3 model B ESS Sabre HIFI Expansion Board X6000 8.0CH HiFi HAT

TAG： Raspberry Pi JETSON NANO Expansion Board PiKVM-A3 Raspberry Pi 4 Operation and maintenance of Over IP Server Refractive Prism Spotpear ESP32-S3 2.1inch LCD N8R8 Captive TouchScreen Display 480x480 4inch LCD Luckfox Pico Ultra kit RGB Captive TouchScreen Display TVBOX Raspberry Pi display Raspberry Pi 5 Cooling Raspberry Pi5 Case PCIe RJ45 Gigabit Ethernet Box Raspberry Pi Screen Raspberry Pi 5 Official Original PCIe to M.2 NVMe SSD HAT+ Board Pi5 Raspberry Pi Pico 1.3inch LCD EG25-G Mini PCIe SIMCom 4G LTE Cat-4 Global GNSS PCI Express Mini Card Robots Car 360° Omnidirectional 2-Axis Pan-Tilt Camera Serial Bus Servos General Driver Board JETSON NANO MINI Board DC-DC step-down mini Raspberry Pi 3D Display Pi4