• sales

    +86-0755-88291180

15.6inch FHD Monitor User Guide

Introduction

15.6inch Universal Portable Touch Monitor, 1920×1080 Full HD, IPS Screen, HDMI/Type-C, Ideal Companion for Various Host Devices

Features

  • Display: 15.6inch, 1920×1080 pixels, IPS screen (up to 178° viewing angle)
  • Touch panel: capacitive, toughened glass panel, 6H hardness
  • Display interface: Type-C/HDMI
  • Touch interface: Type-C/USB
  • Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black
  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
  • Supports desktop computers with Windows 10/8.1/8/7, 10-point touch, and driver free
  • Supports notebooks from Apple, HUAWEI, Lenovo, HP, DELL, etc. dual-screen display, balance the work and entertainment
  • Supports cell phones from HUAWEI, OPPO, Samsung, etc. mirror cast via the Type-C connection, ideal companion for travelling
  • Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • USB expansion port for mouse/keyboard
  • Type-C/HDMI audio input, 3.5mm headphone/speaker jack
  • Embedded ferrite Hi-Fi speaker
  • 10000mAh big battery, enables 3-4h playtime on the trip


Interfaces and Buttons



How to Use

Working with PC

This LCD supports Winodows 7/8/8.1/10 when working with PC via HDMI interface

  1. Connect 5V/4A power adapter to DC interface of LCD, the backlight of the LCD will turn on after powering on
  2. Connect Touch interface of LCD to USB port of PC by USB cable. Touch function is enabled after that.
  3. Connect HDMI interface of LCD to HDMI interface of PC by HDMI cable. LCD displays normally after seconds.

Note:

1) If you connect multiple screens to your PC, please set this LCD as main display for properly touching
2) Some PC cannot support hot-plug, in this case, you should restart LCD to make LCD available
3) Audio output is only available when using HDMI interface

Working with Raspberry Pi

When working with Raspberry Pi, this LCD supports Raspbian/Ubuntu mate/Kali/Retropie/Windows 10 iot Core

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.

Download the Raspbian image from Raspberry Pi web site. Write the image to a TF card and append the following lines to the config.txt file which is located in the root of your TF card:

max_usb_current=1
hdmi_group=2
hdmi_mode=82
hdmi_cvt 1920 1080 60 6 0 0 0

You must make sure that there are no spaces on either side of the equal sign.

  1. Connect 5V power adapter to DC interface of LCD (if the internal batteries is fulled, you can skip this step)
  2. Connect the Touch interface of LCD to USB port of Raspberry Pi
  3. Connect HDMI interface of LCD to HDMI port of Raspberry Pi
  4. Save and connect the TF card to your Pi then power up.

Working with Smart Phone

  1. Connect 5V power adapter to DC interface of LCD (if the internal batteries is fulled, you can skip this step)
  2. Connect Type C of LCD to Type C port of smartphone.

External guides

TAG: Raspberry Pi 5 SSD ESP32 IR Thermal Imaging Camera Intel BE200 Wireless WLAN Card Gigabit Tri-Band WiFi7 Bluetooth 5.4 M.2 MU-MIMO IEEE 802.11 VGA to RGB USB CAN Analyzer Industrial USB TO RS232/485 Serial UART Converter FT232RNL Compact Size Raspberry Pi 5 IR Camera Thermal imaging camera RP2040 ISX031C GMSL Camera H100 Image Sensor IP67 protection rating For Jetson Orin And MAX9296 GMSL camera voice module RP2040-Keyboard-3 RP2040 Raspberry Pi 12.3 inch LCD HDMI /Type C Display In-Cell Capacitive TouchScreen 1920x720 For Jetson Nano/mini Computer PC Raspberry Pi DS3231 Bus Servo DC-BUCK-Adapter 7.2V Voltage mini module For SC15/SC09 Servo JETSON-IO-BASE-A user Guid ESP32 C3 1.44inch LCD Raspberry Pi 14 inch LCD 2K HDMI /Type C Display Capacitive TouchScreen 2160x1440 For Jetson Nano/mini Computer PC EoAT Setting