Raspberry Pi 10.1inch HDMI LCD User Guide

Introduction

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi

About LCD Version

Since from December 2017, The display of 10.1inch HDMI LCD has been updated to RTD2660 instead of TFP401.

The new version improves the compatibility with various device. New version has 5 Keys on the backside, user could use them to change the brightness and contrast ratio of LCD.

New RTD2660 version could replace the old TFP401 version in most situation. If you want the old version, please kindly contact us. To differentiate these two version, you can refer to the pictures below, the left is the new one, RTD2660 version, and the right is TFP401 version.

User Manual

Driver

The driver can be downloaded from github

git clone https://github.com/waveshare/LCD-show.git

Software

Image

Description: if you felt hard to install driver, try the image with driver pre-installed.

RPi-7inch_101inch-HDMI-LCD-GPIO-Touch-1024x600-Raspbian-180326.7z

LCD Panel Dimension

10.1inch HDMI LCD panel dimension

3D Drawing

3D Drawing

Question:

Why does the touchscreen not work well?

Answer:

Now, we only provide touch screen drivers for Raspbian and Ubuntu Mate. How to install the driver? See:#Method_1._Driver_installation

Question:

Why does the image provided on wiki does not work on my Pi?

Answer:

The image provided may differ depending on batches, however, some Images are just available for Pi 2 (or before, but not for Pi 3). In such cases you can download the latest version from Raspberry Pi website and install the driver. See:#Method_1._Driver_installation
Make sure the hardware connection is correct and connects fine.
Make sure you've written the image to your SD card using the software File:Win32DiskImager.zip rather then just copy and paste.
It is strongly recommended to use a stand-alone 5V/3A power adapter, because the USB port of PC might not have enough power to support the Pi and LCD.

Question:

Could I only connect the HDMI cable?

Answer:

No, the HDMI interface is only used for display. You also need to inserted the GPIO for touching and power. BTW, you can also connect external power adapter to USB interface for power if LCD has external power interface.

Question:

What is working temperature of this LCD?

Answer:

The working temperature is 0°C -- 70°C

Question:

What are the power requirements?

Answer:

When working with 5V input, the current is about 550mA with back light on and 100mA with back light off.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： GC2083 Rounded LCD Jetson 1.5inch LCD TTL To CAN Raspberry Pi 5 Camera ESP32 0.85inch LCD Spotpear Raspberry Pi 5 Audio Card Aluminum Heatsink RS485 to Ethernet Arduino 0.96inch RGB OLED STM32 downloader Raspberry Pi 5 PCIe to USB3 HUB Double 2.5G ETH RJ45 and M.2 NVMe SSD PI5 Expansion board HAT+ WiFi Wireless ESP32 DDSM Motor Driver HAT For Direct Drive Servo Hub Motors For Raspberry Pi Raspberry Pi Screen Raspberry Pi Pico 2 RP2350 1.8 inch AMOLED Development Board Display 368×448 TouchScreen Programmable Watch QSPI Sensor Raspberry Pi 5 Speaker Luckfox Pico Camera MIS5001 5MP wide-angle lenses‌ For RV1106/Pro/MAX/Ultra (Not For RV1103 Pico)

Raspberry Pi 10.1inch Resistive Touch Screen LCD compatible with HDMI

TAG： 2.15 inch e Paper HAT+ B E Ink 296×160 Screen Display Arduino Raspberry Pi Jetson Nano STM32 Pi5 Heatsink Sipeed SLogic USB Logic Analyzer 80M DAPLink CKLink Debugger Tool UART Module Raspber Pi 5 XD-51 Pi5 Official Active Cooler ADXL354C Sensor Accelerometer spotpear Raspberry Pi 13.3 inch FHD Monitor LCD 1080P Capacitive TouchScreen Display Type-C/HDMI For Computer PC Raspberry Pi 5 PD Activation Raspberry Pi 5 10.1 inch DSI LCD Captive TouchScreen MIPI Display 1280x800 Raspberry Pi 5 Official Case LuckFox Pico SC3336 Pi5-Active-Cooler-C GC9A01 Raspberry Pi 5 Raspberry Pi 5 PCIe M.2 NVMe SSD Pi5 2230-Board mini Raspber Pi 5 Milk-V Duo RJ45