• sales

    +86-0755-88291180

Third-party library configuration

1】Configure the third-party libraries required for the project

libFolderCopy TFT_eSPI, TJpg_Decoder, ArduinoJson, Time, HTTPClient, lvgl, lv_conf.h, etc. to the libraries directory in the Arduino IDE.

TAG: X1005 Raspberry Pi 5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2230/2242/2260/2280 Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times ESP32-C6 AI Voice Chat Robot For Xiaozhi 1.8 inch AMOLED Development Board 1.8inch TouchScreen Deepseek ADXL354C Dev Board DeepSeek AI Voice Chat ESP32 S3 Development Board 1.8 inch AMOLED Display 368×448 1.8inch TouchScreen Programmable Watch QMI8658 /MIC /Audio /Battery ESP32 C6 Development Board 1.47 inch LCD Touch Screen 1.47inch Display 172×320SD AXS5106L JD9853 Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter Raspberry Pi 3.97 inch e-Paper link BW 800x480 For Arduino / Jetson / STM32 /ESP32 USB CAN Analyzer Jetson Orin 4G/3G/2G expansion board GNSS GPS SIM7600G-H-M.2 Raspberry Pi CM5 IO BASE A Mini Board a Base Development Platform Compute Module 5 IO Board X1003 Raspberry Pi 5 PCIe to M.2 NVMe SSD MINI Adapter Board HAT Pi5 2242 2230 Industrial RS232 to RS485 Raspberry Pi Pico 2 RP2350 industrial 6-ch Relay RS485 isolation protection Raspberry Pi 0.96inch RGB OLED Sensor Spotpear Raspberry Pi CM5 4G/5G Dual Ethernet Port ETH Gigabit/2.5G Expansion Board with RJ45 IO Base and GPIO Raspberry Pi Camera Raspberry Pi Pico 2 RP2350 bit board Size & Port high Compatible With BBC Micro:bit