Overview

PCIe to 2-ch PCIe FFC adapter board designed for Raspberry Pi 5, PCIe 2.0 Version (PCIe Gen2)

Features

PCI-E×1 only supports Gen2
Only supports PI5B
Onboard working indicator, PWR stays on when powered on
Flexible combination, easy stacking of multiple PCIe HAT modules

Usage Instructions

Hardware Connection

Pay attention to the direction of the cable, and the connection is shown in the figure:

Boot PCIe

1. Enable PCIE interface

PI5B defaults to enabling the PCIE interface.
If it fails to boot, add the following to /boot/firmware/config.txt:
dtparam=pciex1

2. The module only supports PCIE Gen2 x1

Resources

FAQ

Question: Does it support Hailo-8?

Answer:

It's okay to use, but the rate can only support GEN2 mode, and the other channel also consumes the rate, which will result in being unable to fully utilize the performance

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86 13434470212

Email: services01@spotpear.com

TAG： Raspberry Pi 5 Raspberry Pi 7.5 inch e-Paper link (H) RYBW 800x480 For Arduino / Jetson Nano / STM32 Raspberry Pi 8 inch DSI MIPI LCD TouchScreen Display 8inch 800x1280 For Luckfox Lyra RK3506/ESP32-P4/Luckfox Omni3576 ESP32-S3 GC9A01A Raspberry Pi 3 display HAT Raspberry Pi 5 PD Activation Raspberry Pi 5 Raspberry Pi Raspberry Pi Screen 0.96inch RGB OLED PC USB Monitor Screen Raspberry Pi RP2040 Keyboard ESP32 S3 LCD Development Board 1.3 inch Display 1.3inch Screen ST7789 240x240 Mini TV SD-Port QST QMI8658 Gyro Sensor LVGL For Arduino ESP32-C6 Development Board UART To CAN Mini Sipeed Lichee Tang Nano1K FPGA MINI Development Board GW1NZ-1 1.54 inch Passive NFC e-Paper ink (G) RYBW Display Screen No Need Battery Wireless Power & Data Transfer LuckFox SC3336 BPI-M4 Berry Raspberry Pi 12.3 inch LCD HDMI /Type C Display In-Cell Capacitive TouchScreen 1920x720 For Jetson Nano/mini Computer PC

PCIe-TO-2-CH-PCIe-HAT User Guide