ESP32-P4-Module Development Board

High-performance development board based on ESP32-P4 and ESP32-C6

Rich human-computer interaction interface

Package Selection

Examples of meal combinations

DSI capacitive touch screen comparison

Adopt IPS fully laminated tempered glass panel with 178° wide viewing angle
Support ten-point touch, clear picture, excellent visual experience

(Only Package B and C have screen)

Raspberry Pi Camera Model B

5 megapixels | Manual focus

Compatible with Raspberry Pi series motherboards

The pictures are for display only. Please refer to the configuration list for detailed configuration.

Development Board Introduction

This product is a multimedia development board based on ESP32-P4, integrated with ESP32-C6, supporting Wi-Fi 6 and Bluetooth 5 wireless connections. It provides a rich set of human-computer interaction interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI, etc. In addition, it supports USB OTG 2.0 HS, reserves an RJ45 Ethernet interface for expandable PoE, and has an onboard 40PIN GPIO expansion interface, which is compatible with some Raspberry Pi HAT expansion boards to achieve a wider range of application adaptation. ESP32-P4 uses a 400MHz dual-core RISC-V processor, supports a maximum of 32MB PSRAM, and has peripherals such as USB 2.0, MIPI-CSI/DSI, H.264 encoding, etc., to meet the needs of low-cost, high-performance, and low-power multimedia development. In addition, ESP32-P4 integrates digital signature peripherals and dedicated key management units to ensure data and operation security. ESP32-P4-Module-DEV-KIT is designed for high-performance and high-security applications to meet the needs of embedded systems in human-computer interaction, edge computing, IO expansion, etc.

Main features：

• High-performance MCUs with RISC-V 32-bit dual-core and single-core processors
  
• 128KB HP ROM，16KB LP ROM，768KB HP L2MEM，32KB LP SRAM，8KB TCM
• Powerful image and voice processing capabilities, image and voice processing interfaces include JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), H264 video encoder
  
• 32MB PSRAM in chip package, 16MB Nor Flash in module
  
• Common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminal and RTC battery terminal are brought out on the board
  
• 2*20 pin headers are provided on the board, leading to 28 remaining programmable GPIOs
  
• Security mechanisms: secure boot, flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, which can realize access rights management (APM) and privilege separation
  

Highly integrated, powerful performance

The development board uses the ESP32-P4-Module module, with built-in ESP32-C6 and 16MB Nor Flash

Supports Wi-Fi 6 and Bluetooth modules

The onboard ESP32-C6 chip expands 2.4GHz Wi-Fi 6 and Bluetooth 5/BLE for ESP32-P4, and uses the SDIO interface protocol for communication, providing stable connection and efficient transmission.

Reserved PoE module interface

Make the power supply mode of the development board more flexible

Using PoE Module
PoE Ethernet power supply

Only one network cable is connected to the PoE device.This will allow the ESP32-P4-Module-DEV-KIT to be connected to the Internet and powered

This product does not contain a PoE expansion module, which must be purchased separately; please refer to the configuration list for detailed configuration

Resource Overview

[] ESP32-P4-Module-DEV-KIT

[] ESP32-P4-Module-DEV-KIT-A 

[] ESP32-P4-Module-DEV-KIT-B

ESP32-P4-Module-DEV-KIT-C

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com