【Product Introduction】

[] 5.79inch E-Paper Display Module, E-Ink Display, 792x272, Black/White, SPI Interface

【Product Details】

5.79″ E-Paper Module

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...

【Features At A Glance】

[] No backlight, keeps displaying last content for a long time even when power down

[] Ultra low power consumption, basically power is only required for refreshing

[] SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.

[] Onboard voltage translator, compatible with 3.3V/5V MCUs

[] Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

【Specifications】

OPERATING VOLTAGE	3.3V/5V	DISPLAY COLOR	Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	4
OUTLINE DIMENSIONS	152.50 × 58.50mm	FULL REFRESH TIME	3.5s
DISPLAY SIZE	139.00 × 47.74mm	PARTIAL REFRESH TIME	0.8s
DOT PITCH	0.1755 × 0.1755mm	REFRESH POWER	<50mW
VIEWING ANGLE	>170°	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	792 × 272 pixels

Advantages Of EINK

[] E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

[] E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

PWR	Power on/off control
BUSY	Busy status output pin
RST	External reset, low active
DC	Data/Command selection (high for data, low for command)
CS	SPI chip selection, low active
CLK	SPI SCK pin
DIN	SPI MOSI pin
GND	Ground
VCC	Power (3.3V / 5V input)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Usage Example

Connecting With Raspberry Pi 5

* for reference only, the Raspberry Pi 5 is NOT included.

【Application Examples】
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

【Outline Dimensions】

[] 5.79inch-e-Paper-Module

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com