Raspberry Pi 2.9 inch e-Paper link (G) RYBW 296x128 For Arduino / Jetson / STM32 /ESP32

Raspberry Pi 2.9 inch e-Paper link (G) RYBW 296x128 For Arduino / Jetson / STM32 /ESP32

$16.9

Brand：SpotPear

SKU：010608100000

Date：2026-01-04 15:50

Part Number：

2.9inch e-Paper (G) 2.9inch e-Paper Module (G)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

2.9inch E-Paper Display (G), E-ink Display, 296x128, Red/Yellow/Black/White, SPI Interface

2.9″ E-Paper (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Version Options

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32)
Optional for e-Paper driver board:
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Yellow/Black/White
OPERATING VOLTAGE	with driver board: 3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 79.0 × 36.7 × 1.2 (mm)	FAST REFRESH TIME	11s
OUTLINE DIMENSIONS	with driver board: 89.50 × 38.00 (mm)	FULL REFRESH TIME	16s
DISPLAY SIZE	66.89 × 29.05 (mm)	REFRESH POWER	<30mW
DOT PITCH	0.135 × 0.135mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	296 × 128 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Jetson Nano / Arduino / RDK Series Boards

BUSY	Busy status output pin
RST	External reset, low active
DC	Data/Command selection (high for data, low for command)
CS	SPI chip selection, low active
CLK	SPI SCLK pin
DIN	SPI MOSI pin
GND	Ground
VCC	Power (3.3V / 5V input)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions

2.9inch e-Paper (G)

2.9inch e-Paper Module (G)

[] 2.9inch e-Paper (G)

[] 2.9inch e-Paper Module (G)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!