Pi HEATSINK BRACKET User Guide

Note: Do not include Raspberry Pi 4B, Please Buy alone.

Overview

This is an aluminum alloy self-heating heat sink, which can be equipped with a cooling fan, which is specially used for heat dissipation of motherboard chips such as Raspberry 3B/3B+/4B.
It is made of imported high-quality pure aluminum, and it can control the heat generated by the chip when the motherboard is working and cooling it.
Keep the operating temperature of the motherboard below the normal value and run stably, so as to prolong the service life of the motherboard.

Features

Material: aluminum Case
Three colors available: Silver/Black/Golden
Hole position and appearance: Fans can be installed, easy to install, light and beautiful
Supported devices: suitable for Raspberry Pi 4B/3B/3B+

Installation mode

Fan installation

Outline Dimensions

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Program Raspberry Pi 1.54inch OLED Spotpear Luckfox Pico LCD DDSM400 Direct Drive Servo Motor All-In-One Design Hub Serial -LIN Bus Motor Raspberry Pi 5 IR Camera X1008 Raspberry Pi 5 PCIe to 2.5" 3.5" SATA HDD/SSD Dual Double-SATA (NOT BOOT From SATA/SSD Sipeed RISCV LicheeRV Nano Super-Mini SG2002 AI RAM-256MB Raspberry Pi 5 UPS HAT E 4-Port For 21700-Li-Battery (NOT includ) 5V6A Uninterruptible Power Supply Retail electronic Tag 1.69inch LCD TouchScreen Display 240×280 ST7789 Arduino Raspberry Pi ESP32S3 Pico STM32 DeepSeek XiaoZhi AI Voice Chat Robot BOX ESP32-S3 Development Board 3.5 inch LCD N16R8 Touchscreen Display 6-Axis /Camera /SD Industrial RJ45 Ethernet To 16-ch Relay Module Modbus RTU TCP With Protection and guide rails RP2040 0.85inch Screen Raspberry Pi RP2040 LoRa-HF UART To WiFi RP2040 LoRa Digital Photo ESP32-S3 1.28