Raspberry Pi Compute Module 3+ series User Guide

Overview

Raspberry Pi Compute Module 3+ 8GB/16G/32G. This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Industrial Modbus RTU 8 ch Relay Module Milk V Duo Arducam JETSON NANO MINI Core1121 LoRa LR1121 HF LF SPI For Sub-GHz and 2.4GHz Industrial Raspberry Pi 3.97 inch e-Paper link BW 800x480 For Arduino / Jetson / STM32 /ESP32 Horizontal Drag Instructions RS232 to RS485 Jetson Nano Cooler ESP32 C6 Development Board 1.43 inch AMOLED QSPI Display 1.43inch TouchScreen Dual MIC AudioI Deepseek N16R8 UPS HAT D Raspberry Pi 5 Raspberry Pi Camera V2 Milk-V ADXL354C Evaluation Board Pi5 Milk-V Duo S Extend Partition on SD Card or eMMC Serial UART Bus Servo ST3215-HS 20KG.CM High Speed Magnetic Encoder 360° Large Torque RISC-V

Raspberry Pi Compute Module 3+ series User Guide

Overview

To：

Email(support)

Raspberry Pi Compute Module 3+ 32GB