• sales

    +86-0755-88291180

Raspberry Pi Compute Module 3 Lite User Guide

Overview

The Compute Module 3 Lite contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM), without the 4GB of on-module eMMC flash found on the Compute Module 3. The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU.

This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi).

TAG: Rounded LCD Arducam 64MP Camera ESP32-S3 1.28inch LCD ESP32-S3 GC9A01A Industrial-grade isolated 4-way RS485 hub repeater One RS485 TO Four RS485 SpotPear Servo PWM motor WP5320 WP5335 35/20KG.CM 180° PWM digital servo double ball bearings Step Recording and Reproduction ESP32-S3N8R8 7inch LCD Display TouchScreen 800×480 WiFi Bluetooth CAN RS485 Sensor SpotPear Arduino 0.96inch RGB OLED JETSON NANO ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino ESP32-S3 Development Board 1.47 inch LCD Screen Display 172x320 SD-Port LVGL USB Serial UART Bus Servo TTL ST3235 30KG.CM Magnetic Encoder 360° High Precision And Large Torque ESP32 S3 Development Board 1.43 inch AMOLED Display 1.43inch TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor Industrial Isolated 4CH RS485 TO POE ETH (B) RJ45 Converter UART For Modbus RS232 to RS485 RDK X5 PoE Module For Power Over Ethernet/ IEEE 802.3af/at PoE For D-Robotics RDK X5 SpotPear