• sales

    +86-0755-88291180

9. Fonts are not clear on LCD User Guide

Fonts are not clear on LCD

1. Problem phenomenon

During the experiment, it was found that some of the fonts displayed on the display screen were very dim, and some were almost white, so it was difficult to see the font.

2. The cause of the problem

In fact, it is caused by the contrast of the screen. Due to the individual differences of the products shipped from the factory, some products need to adjust contrast ratio before they can be displayed normally.

3. Solution

Open the code to initialize the LCD function. The last parameter is to set the contrast ratio. Modifying the contrast ratio appropriately can solve the problem.




Contrast ratio is stored in the contrast variable, we can directly modify the value of the variable, the range of contrast is 30-90.

Then, re-compile the project and run the program to see the effect.

TAG: Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter UART Day and IR Night Vision Raspberry Pi 5 27W Power LuckFox Raspberry Pi 3.5 inch LCD F Display Capacitance TouchScreen 60fps ST7796 GT911 320x480 Also For Arduino/Pico2/ESP32/RP2040/RP2350 ESP32-C6 Development Board ESP32-S3 AI 3.97-inch e-Paper Ink Screen 3.97inch Display AIoT Development Board Deepseek ESP32-S3 1.43inch AMOLED Display AI Development Board 466×466 1.43 inch TouchScreen Deepseek Raspberry Pi 5 Raspberry Pi 5 PoE MINI HAT(G) Power over RJ45 Ethernet 802.3af/at Moudle for Pi5 ESP32 C3 1.44inch LCD UGV Rover ROS2 PT AI OpenCV Robot Car MediaPipe For Jetson Orin Nano GPS LCD Driver Board D-Robotics RDK X3 MD Carrier Board For RDK X3 Module Horizon Sunrise Pi ARM Cortex-A53 5Tops Raspberry Pi DS3231 RP204 0.85inch LCD 5inch Raspberry Pi Pico 2 RP2350B 1.46 inch Round LCD Touch Display 412x412 HMI LVGL QMI8658 6-axis 65K Colors RISC-V