0.95inch RGB OLED (B) User Guide

Introduction

0.95inch RGB OLED, SPI interface, straight/vertical pinheader

Resources

Question:

What is the electricity voltage of the system working with an OLED module?

Answer:

The OLED module should work at a system with 3.3V operation voltage. However, it can work properly at a system with 5V operation voltage as well, the aging test (more than 24 hours) shows.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： LCD Screen Raspberry Pi Pico RS485 Interface SpotPear RP204 0.85inch LCD Raspberry Pi 5 PD Power 1.83inch LCD TouchScreen Display 240&amp;amp;times;280 NV3030B Arduino Raspberry Pi ESP32S3 Pico STM32 Raspberry Pi 5inch Display 1024x600 HDMI Capacitive TouchScreen 5 inch LCD B Wide-Cover For Mini PC Raspberry Pi 5 Pure-Copper Cooler spotpear Luckfox Raspberry Pi 5 Camera RS232 to RS422 Jetson Nano 4G module LuckFox Pico USB Monitor ESP32 ST7789 configuration Raspberry Pi 5 Raspberry Pi Autofocus Camera ESP32 S3 Development Board 1.85 inch Round LCD Display 360&times;360 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino

Price：

$11.89

Model：

0.95inch-RGB-OLED-(B)

0.95inch RGB OLED, SPI Interface, Straight/Vertical Pinheader

TAG： Rockchip Raspberry Pi Pico PC USB Monitor Screen Jetson Nano Development Board IO-BASE-A For JETSON NANO B01 Arduino Thermal imaging Spotpear ESP32 C3 ST7735 Digital ornaments Raspberry Pi Zero ESP32-S3 GEEK Arduino ATmega32U4 Raspberry Pi 5 PCIe M.2 NVMe SSD Pi5 2280-2242 2230 X1001 For Arduino Raspberry Pi LCD Raspberry Pi Camera V2 Raspberry Pi 5 Camera Modbus RTU Relay 32CH RM502Q AE IoT EMBB 5G 4G 3G M.2 LTE-A/NSA SA GNSS DFOTA VoLTE Quectel Autofocus Camera Raspberry Pi CSI-to-HDMI