• sales

    +86-0755-88291180

Lichee Tang Nano1K FPGA User Guide

Introduction】

Tang Nano 1K is a core board designed based on Gowin GW1NZ-LV1 FPGA chip. The board is equipped with RGB LCD interface and onboard USG-JTAG debugger, which make it convinent for users to use. User can use this for small digital logic design and experiment.


Parameters】

itemSpecs
chipGW1NZ-LV1 FPGA
logic units(LUT4)1152
Register(FF)864
Block SRAM(bits)72K
Number of B-SRAM4
User flash(bits)64K
Number of Pll1
Number of I/O Bank2

Pinmap


Informations】

Addition】

  1. For Fpga burning we require using this Programmer application. Because other version Programmer application may fail burning this board.

  2. If you meet problems, please visit problems first, normally most problems will be solved after using this programmer Click me.


Support】

Monday-Friday (9:30-6:30) Saturday (9:30-5:30) -China time
Email: services01@spotpear.com




TAG: Raspberry Pi 5 Terminal Core3566002032 ESP32-S3 1.28inch LCD MAX9296 GMSL Camera Adapter Board 2-Ch High-Speed And Low-Latency Transmission For Jetson Orin Nano/NX ESP32-S3 A7670E 4G development board supports LTE Cat-1/2G/GNSS positioning/WiFi/Bluetooth ESP32-S3 ST7789 Raspberry Pi ZERO Raspberry Pi 5 Box Case Ki-A PCIe to RJ45 Gigabit Ethernet All Ports To Pi's USB Side Raspberry Pi AI Camera Official Original 12MP IMX500 Intelligent visual Sensor On-Board RP2040 MEGA2560 R3 ESP32 IR Thermal Imaging Camera USB Monitor ESP32 C3 XIAO RA4M1 Tiny SuperMini Board For Arduino Uno IDE For SeeedStudio R7FA4M1 Raspberry Pi Pico HDMI Industrial Isolated 4CH RS485 TO POE ETH (B) RJ45 Converter UART For Modbus JETSON NANO MINI Aluminum Heatsink Raspberry Pi Refractive Prism Modbus POE ETH Relay Waveshare User Guide