Raspberry Pi 1.54inch Game LCD User Guide

Introduction

The 1.54inch lcd work with Raspberry Pi zero/zero 2/3B/4B/CM4, Support Raspbian and Retropie

Operating voltage: 3.3V
Interface: SPI
LCD type: TFT
Display Controller: ST7789V
Touch Controller: XPT2046(The Retropie OS don't support touch)
Resolution: 240*240 （software 480x480）

Use our pre-configured Images

->Raspbian

1.54inch-LCD-Raspios-Bookworm-240315_240615.zip(Work for All Pi' Version)
1.54inch-LCD-Raspios-buster-211202_211210.zip(Not work for Pi5)
1.54inch-LCD-Raspios-bullseye-211030_211210.zip(Not work for Pi5)

->Retropie (Not work for Pi5)

Install the driver at yourself image

->Work with Retropie (Not work for Pi5)

Display configuration tutorial ：

fbcp-9341:higher fps or device tree:higher compatibility

Joystick configuration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
Game Full screen setting

->Work with Raspbian-Bookworm ( Work For All Pi' Version)

Display configuration tutorial (Bookworm Lite For All Pi' Version )
Display configuration tutorial (Bookworm Desktop For Pi4 & Pi5 )
KEY CODE

->Work with Raspbian-Old buster&bullseye (Not work for Pi5)

Display configuration tutorial
Touch configuration tutorial
Touch calibration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
KEY CODE

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

Pinout

See Pinout from here

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Images

->Raspbian

->Retropie

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： ESP32 S3 Raspberry Pi 18.5inch FHD LCD 1920x1080 Capacitive TouchScreen Display For Raspberry Pi/Jetson Nano/ Milk V Duo E-Ink X1008 Raspberry Pi 5 PCIe to 2.5" 3.5" SATA HDD/SSD Dual Double-SATA (NOT BOOT From SATA/SSD Raspberry Pi Pico 2 RP2350 1.47 inch LCD B Display Development board RP2350A 1.47inch Screen RGB color RS485 TO Relay Industrial UART To WiFi Raspberry Pi 24.5 inch Type C/HDMI 2K Display 24.5inch Screen 2560x1440 Computer PC Phone For Xbox/PS4/Switch Solar Charge Module Raspberry Pi 3.97 inch e-Paper link BW 800x480 For Arduino / Jetson / STM32 /ESP32 ESP32 Thermal imaging Arduino Thermal imaging 1.3inch LCD Sipeed Lichee Tang Nano1K FPGA MINI Development Board GW1NZ-1 Raspberry Pi display Luckfox Pico LCD CSI-to-HDMI ESP32-P4 Core Board 32MB PSRAM 16MB Flash DC-DC Step-Down Mini voltage Moudle Input 5~36V voltage Output 5V/3.3V 4A