• sales

    +86-0755-88291180

X1006 User Guide

Important Notes

  • The X1006 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
  • Not compatible with M.2 NVMe SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-SATA devices
  • Older SATA drives with less efficient flash media may not perform as well as newer drives
  • New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.

Overview

X1006 PCIe to 2 ports SATA HDD/SSD expansion board is designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of a SATA 2.5-inch HDD and SATA M.2 KEY-B 2280 SSD, unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.

The X1006 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favorite HATs while also utilizing this expansion board. Additionally, the X1006 and your HDDs can be powered from Raspberry Pi5 via pogo pins, streamlining the power supply to a single source.

The X1006 serves as the perfect storage solution for establishing a home media center or constructing a network-attached storage (NAS) system. It empowers you to store and stream your personal collection of videos, music, and digital photos within the confines of your home or remotely from anywhere around the globe.

Raspberry pi 5 SATA Series

ModelDescriptionSupported HDD/SSDMounting PositionSupport NVMe BootMatching CaseMatching Cooler
X1100USB to SATA2.5" SATA HDD / SSDBottomYesX1100-C1Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1006PCIe to SATA2.5" SATA HDD + M.2 SATA Key-B 2280 SSDBottomNONO Case yetOfficial Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1007PCIe to SATADual SATA 2.5" HDD / SSDBottomNONO Case yetOfficial Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1008PCIe to SATA2.5" SATA HDD / SSD + 3.5" SATA HDD ShieldBottomNONO Case yetOfficial Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1009PCIe to SATA5PCS 2.5" SATA HDD / SSD /3.5" SATA HDDTopNONO Case yetOfficial Cooler / H505 Active Cooler / Argon THRML Cooler / H501

Features

  • Compatible With Raspberry Pi 5B
  • Supports the connection of a 2.5-inch SATA HDD and a M.2 2280 SATA SSD to your Raspberry Pi 5 simultaneously
  • Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
  • Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
  • Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
  • Compatible with SATA 6G, 3G, and 1.5G hard drives
  • Features plug-and-play installation for ease of setup
  • LED indicators display power and drive status
  • Powered from Raspberry Pi5 via pogo pin, streamlining the power supply to a single source
  • Compatible with the official active cooler without compromising cooling performance
  • Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
  • PCB Size: 107.5mm x 87mm

How to Power

Power supply: 5dc +/-5% ≥3A via FFC & pogo pins

Ports & Connectors

  • PCIe connector x1 - 16-pin pitch0.5mm
  • SATA 2.5" HDD/SSD connector x1 - 7+15P
  • SATA M.2 2280 SSD connector x1 - 64P KEY-B

Test Reviews

Test Conditions

  • System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
  • Interface board details: X1006 v1.1 PCIe to dual 2.5" SATA HDD/SSD Shield
  • Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: December 5th 2023)
  • Storage details: Samsung EVO 750 SSD, Lite-on L8T-64L6G-HP 64GB SSD


Testing disk drives read speed at PCIe2.0 with hdparm


Samsung EVO SSD: 426.07MB/s, Lite-on SSD: 259.15MB/s

Packing List

  • X1006 V1.1 PCIe to SATA M.2 SSD+2.5" HDD shield x1
  • PCIe FFC Cable 37mm x1
  • Screw pack x1


User Manual

Hardware


Software

After-sales

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Email: services01@spotpear.com

TAG: ESP32-S3 A7670E 4G development board supports LTE Cat-1/2G/GNSS positioning/WiFi/Bluetooth ADXL354CZ EVAL BOARD 2.8inch Capacitive TouchScreen LCD Display ST7789 CST328 240x320 For Arduino/Raspberry Pi/ESP32/Pico VGA to TTL Tutorial ESP32-S3 0.85inch LCD Sipeed Lichee Tang Nano 4K FPGA MINI Development Board W1NSR-LV4C GOAI Gowin Round Rotary LCD touch screen 1.28inch 1.6inch 2.1inch Knob central control lighting LCD DDSM400 Direct Drive Servo Motor All-In-One Design Hub Serial -LIN Bus Motor STM32 0.96inch RGB OLED Sipeed Lichee Tang Nano 20K FPGA RISCV Open-Source Retro-Game Linux MINI Development Board GW2AR-18 Install Espressif IDF Plugin Tutorial User Guide RP2040-PiZero Raspberry Pi 3 LCD HAT Raspberry Pi Pico 2 RP2350 2 inch LCD Capacitive TouchScreen Development Board 240x320 Display QMI8658 6-Axis /OV5640 Camera /SD /Battery Port Horizontal Drag Instructions Raspberry Pi 5 DSI Bookworm Electronic EYE 0.71inch Round LCD Display Screen For Arduino Raspberry Pi ESP32 Pico STM32 Raspberry Pi CM5 Compute Module 5 Development Kit With CM5104032 + Official Original IO Board + Case RP2040 LoRa-HF