Lichee Tang Nano4K FPGA User Guide

【Introduction】

Tang Nano 4K is a development board designed based on Gowin little-bee GW1NSR-LV4C FPGA chip. The board is equipped with camera interface and HDMI interface. There is also an onboard USG-JTAG debugger, which make it convinent for users to use. Its Cortex-M3 hardcore can help users study mcu.

【Specs】

The sheet below shows difference with previous product

model	Tang Nano	Tang Nano 4K
FPGA chip	GW1N-1-LV	GW1NSR-LV4C
logic units	1152	4608
Register	864	3456
Hard core	none	Coetex m3
Block SRAM(bits)	72K	180K
User flash(bits)	96K	256K
Number of PLL	1	2
Number of I/O Bank	4	4
Number of users I/O	41	44
Screen interface	40P RGB LCD interface	HDMI interface
camera interface	None	DVP interface
Size	58.4mm*21.3mm	60mm*22.86mm

】Pinmap

【Development software】

Visit install ide to setup your programming environment.

【Burn firmware】

Tang Nano 4K uses the onboard BL702 for jtag, with which to burn bitstream.

Run the Programmer in Gowin IDE to download firmware into FPGA.

【Informations】

【Addition】

Visit Tang questions first if you have any trouble.
Debugging Cortex-M3, we suggest to use serial-port debug way. If you are excellent enough you can try other ways to debug it.
THe HDMI ports are multiplexed as IO and routed to the pin headers. The actual results of the IO which are multiplexed with HDMI pins on the pin headers may not be consistent with what you want because of the external pull up.

【Support】

Monday-Friday (9:30-6:30) Saturday (9:30-5:30) -China time
Email: services01@spotpear.com

TAG： Raspberry Pi DSI Raspberry Pi 5 Fan ESP32 MLX90640 NanoKVM-USB-Development Zero LCD HAT (A) Raspberry Pi 5 PCIe TO Gigabit ETH USB3.2 HAT+ USB HUB Industrial RS485 Modbus RTU Relay Raspberry Pi 5 AI kit Hailo8 26Tops PCIe to M.2 NVMe HAT Plus For Pi5 Raspberry Pi Pico W Raspberry Pi 5 RTC Milk V Duo IO Board Tutorial Raspberry Pi 10.1 inch LCD HDM Display Capacitive TouchScreen 10.1EP-CAPLCD 1920x1200 For Jetson Nano/mini Computer PC 5inch LCD Screen Driver Board AV to TTL Programmable Keyboard Raspberry Pi 12.3 inch LCD HDMI /Type C Display In-Cell Capacitive TouchScreen 1920x720 For Jetson Nano/mini Computer PC Jetson Nano Expansion Board Raspberry Pi 4B/5 Industrial UART 2CH RS485 RS232 CAN FD HAT With Case For Installation of guide rails and hanging ESP32 S3 Development Board 1.64 inch AMOLED Display 1.64inch TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor

Sipeed Lichee Tang Nano 4K FPGA MINI Development Board W1NSR-LV4C GOAI Gowin

[Tutorial Navigation]

【Introduction】

】Pinmap

【Development software】
【Burn firmware】
【Informations】
【Addition】
【Support】