【Overview】
[] USB TO 8CH RS485

[] Industrial Grade Isolated Converter

[] Stable Transmission | Multiple Devices Applicable | Multi-OS Compatible

【Features At A Glance】

[] Supports USB to 8CH RS485, convenient for expanding multiple RS485 industrial serial devices

[] Supports direct power supply via Type-C port, with reserved 5V~36V DC wide voltage screw terminal for auxiliary power input

[] Onboard unibody power supply isolation, provides stable isolated voltage

[] Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption

[] Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic

[] Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance

[] Built-in 120R terminal resistor on the RS485 ports, configurable via jumper for flexible switching

[] LEDs for indicating the power, device configuration status and transceiver status

[] Rail-mount case design, support stackable combination, easy to install and safer to use

【Specifications】

PRODUCT TYPE	Industrial grade isolated USB to RS485 converter
HOST PORT	USB
DEVICE PORT	RS485
POWER SUPPLY	USB Type-C (5V), screw terminal (5V~36V)
USB	Operating voltage	5V
	Connector	USB-C
	Protection	200mA self-recovery fuse, isolated output
	Transmission distance	About 5m
ISOLATED RS485	Connector	Screw terminal
	Direction control	Hardware automatic control
	Protection	600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor)
	Transmission distance	About 1.2km (low rate)
	Transmission mode	Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
	Baud rate	1200bps ~ 921600bps
LED INDICATORS	PWR	Red power indicator, lights up when there is USB connection and voltage is detected
	ACT	Status indicator, lights up green when the driver is detected.
	TXD	Green TX indicator, lights up when the USB port sends data
	RXD	Blue RX indicator, lights up when the device ports send data back
OPERATING ENVIRONMENT	Temperature	-15℃ ~ 70℃
	Humidity	5%RH ~ 95%RH
OPERATING SYSTEM	macOS, Linux, Android, Windows 11/10/8.1/8/7

【Safer Isolated Design】

[] Onboard unibody power supply isolation, provides stable isolated voltage

[] Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption

【Multiple Protection, Safe And Stable】

[] Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.

【Multi System Support】

[] Supports Win11/10/8.1/8/7, MacOS, Linux, Android, Etc.

【Transmission Distance Up To 1.2km】

[] The USB Signal Can Be Converted Into 8 Balanced Differential RS485 Signals And The Transmission Rate Is Stable. The Transmission Distance Is About 1.2km For RS485, And About 5 Meters For USB.

【Interface Introduction】

Note: using USB Type-C port for power supply by default, auxiliary power supply input is optional.

【Rail-Mount Support】
Supports 35mm Standard Guide Rail, With Rail-Mount Buckle, Easy To Install.

【Supports Stackable Installation】

* for reference only, please refer to the Package Content for detailed part list

【Outline Dimensions】

[] USB-TO-8CH-RS485

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com