• sales

    +86-0755-88291180

HDMI-EXTENDER-KIT User Guide

Introduction

HDMI Signal Extender, 1080P high-definition & lossless transmission, transmission distance up to 50m via CAT-5E/6 network cable.

Feature

  • Transmission standard: HDMI1.4B
  • Max. transmission distance: 50M (CAT-6 is recommended)
  • Supported resolution: 1080p/1080i/720p/576p/576i/480p/480i
  • Support color depth 10/12/16-bit mode
  • Support DVI/HDMI
  • Power input: DC 5V 1A

User Guide

  1. Connect the HDMI signal source to the HDMI input port of the transmitter.
  2. Connect the HDMI output port of the receiver to the HDMI transmitter, such as the display device.
  3. Connect the transmitter and the receiver via a network cable.
  4. Respectively connect the transmitter and receiver to the DC 5V 1A power supply.
  5. Connect to the HDMI output device.


Note: The quality of network cables will affect the transmission quality of signals. To achieve better transmission quality, CAT-6 network cables are recommended.

TAG: ISX031C GMSL Camera H100 Image Sensor IP67 protection rating For Jetson Orin And MAX9296 GMSL camera Jetson Orin Case Arducam NVIDIA GPU Monitor Display Raspberry Pi 5 Raspberry Pi Pico 2 RP2350B 3.49-inch capacitive TouchCcree 3.49inch LCD display development board 172×640 ESP32-S3 1.69inch Touchscreen LCD Round Display WiFi Bluetooth With QST Attitude Gyro Sensor QMI8658 X1003 Raspberry Pi 5 PCIe to M.2 NVMe SSD MINI Adapter Board HAT Pi5 2242 2230 Raspberry Pi Auto Focus 12MP IMX708 Camera High Resolution Raspberry Pi 8 inch DSI LCD Display With 5MP Front Camera MIPI 800×480 Capacitive TouchScreen Arduino Board Managers Tutorial User Guide GC9A01 ESP32-C6 1.64inch AMOLED Display Development Board 280×456 1.64 inch TouchScreen ESP32 1.9inch LCD Sipeed MaixCAM SG2002 RISC-V AI Camera Kit with Screen Audio WIFI6 Linux Board Raspberry Pi 5 ESP32 C6 Development Board 1.28 inch LCD Touch Screen 240x240 CST816S SD card slot Pi5 Jetson Nano Heatsink