Arduino Mini LED Bar x8 User Guide

Note: Do not include Raspberry Pi 4B, Please Buy alone.

Overview

This product is an 8-bit independent LED marquee running light module, suitable for Arduino development boards,
Onboard current limiting resistor, 2.54 pin spacing, standard spacing, easy to use on the panel board.
Red light, blue light and green light are optional. 8 independent LEDs, you can observe the IO status of the development board.

Specifications

Name: 8 bit LED water light module
Drive: common cathode high level light
Model: mini LED Bar X8
Input voltage: 3.3-5V
Size: 24*13mm
Input current: 5- 20mA
LED: 0805 SMD LEDx8
Pin pitch: 2.54mm
Color: Red/Blue/Green

Outline Dimensions

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Milk-V Duo S WIFI Configuration Raspberry Pi Secondary Screen ESP32 1.54 inch E-Paper Smart Watch display Screen 200x200 Ultra-low power For Arduino/Micropython/RTOS For Watchy Autofocus Camera CAN FD Analyzer Modbus POE ETH Relay MQTT User Guide Raspberry Pi Pico rp2040 Display image 1.3inch LCD ST7789 change bmp to hex Raspberry Pi IR Array Thermal Imaging Camera Far infrared 80×62 Pixels 45/90 Degree FOV AV to RGB Pi5 lilygo Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT Raspberry Pi PICO Long-Range Communication USB to UART UART Serial TTL To RS232 B Built-In Protection Circuits Rail-mount Jetson Orin Nano/NX Super Developer IO Base Development Board Dual network RJ45 For Jetson Orin Nano/NX Module Circular LCD Screen Jetson LuckFox Pico plus Horizontal Drag Instructions