• sales

    +86-0755-88291180

Raspberry Pi Compute Module 3+ Lite User Guide

Overview

The CM3+/Lite Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM). It's the lite version without onboard eMMC Flash.

This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.

TAG: ESP32 S3 Development Board 1.46 inch Round LCD 1.46inch Display 412x412 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino 1.54inch OLED user guide ESP32 ST7789 configuration ADXL354C Raspberry Pi 5 DSI Bookworm Industrial UART To WiFi ESP32 Thermal imaging camera ESP32-S3 Development Board 4 inch LCD TouchScreen Display 480x480 RS485 /SHT20 /Relay For Arduino LVGL 86 TVbox SpotPear Screen Raspberry Pi 9.7 inch e-Paper HAT+ (E) E-Ink E6 Full color 1120x784 Screen Display For Arduino /STM32 /ESP32/Jetson Nano ESP32-S3 Nano ESP32-S3R8 development board compatible with Arduino Nano ESP32 ESP32-P4 AI Development Board 7/8/10.1inch HMI Touch Screen All-in-One Compatible with Deepseek RS232 to CAN Supports 6V~24V Solar Panel Raspberry Pi Pico 1024×600 Raspberry Pi Auto Focus 12MP IMX708 Camera High Resolution MPS2280 POE Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter Board HAT Pi5 2280/2242/2230 Raspberry Pi Pico 2 RP2350/RP2040 W5100S-EVB-Pico W6300-EVB-Pico2 Ethernet Development Board ETH RJ45 IPS