• sales

    +86-0755-88291180

GPIO Audio Module-Retropie-Audio configuration tutorial

If your Module is GPIO18
Download audremap18.dtbo to your pi
sudo cp audremap18.dtbo /boot/overlays/
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap18,pins_18_19

If your Module is GPIO19
Download audremap19.dtbo to your pi
sudo cp audremap19.dtbo /boot/overlays/
sudo nano /boot/config.txt

Add this code

dtoverlay=audremap19,pins_18_19

If your Module is GPIO18&GPIO19
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap,pins_18_19


After rebooting , You need enable local audio

sudo raspi-config  Select System Options -> Audio -> 'headphone'

Go to retropie menu


Select  ->  AUDIO  ->  HEADPHONE

Then reboot again use sudo reboot 

Set audio voice max

Press key START enter retropie MAIN MENU


select SOUND SETTING
->SYSTEM VOLUME 100
->AUDI0 DEVICE   ->  HEADPHONE

->OMX PLAYER AUDIO DEVICE   -> LOCAL

Go back press key B
Then enter SOUND SETTING ->SYSTEM VOLUME again
You will see it is 97 or 77,You need set it 100 again|
After all setting, the VOLUME will became ok

TAG: Raspberry Pi Pico 7inch DVI LCD RS232 to Ethernet Template: Pico-get-start X1002 Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter Board HAT Pi5 2280 Raspberry Pi5 Raspberry Pi DSI Scr Raspberry Pi Pico 2 Plus RP2350 Board RP2350A ESP32 S3 4inch LCD Development Board 480x480 TouchScreen Display TVBOX LVGL HMI Sensor CAN RS485 SpotPear Raspberry Pi Pico 2 RP2350-Zero Mini Board RP2350A PC USB Monitor Screen 240x280 Luckfox Pico ST7789 ESP32 S3 N16R8 Development board 1.9 inch LCD Display 1.9inch TouchScreen 170×320 SD-Port RGB LED QMI8658 6-Axis ST7789 CST816 Raspberry Pi Pico 2 RP2350 GEEK 1.14 inch LCD 240x135 65K SWD/UART/I2C For OpenOCD/CMSIS-DAP Industrial Modbus RTU Dual Ethernet RJ45 To 8ch POE ETH Relay (C) PoE Power over Ethernet Raspberry Pi 5 PCIe to M.2 SSD USB Camera Arduino 1.5inch LCD Raspberry Pi Pico 2 RP2350-One Mini Board Type-A RP2350A