- sales/support
Google Chat:---
- sales
+86-0755-88291180
- sales01
sales@spotpear.com
- sales02
dragon_manager@163.com
- support
tech-support@spotpear.com
- CEO-Complaints
zhoujie@spotpear.com
- Only Tech-Support
WhatsApp:13246739196
- Purchase/Shipping/Refund
WhatsApp:13424403025
Raspberry Pi Compute Module 4 CM4-DUAL-CAMERA-BASE User Guide
Overview
This is a binocular camera based board that is designed for Raspberry Pi Compute Module 4. Two IMX219 800MP cameras are integrated for the stereo vision projects. An interface expander board is optional for connecting other accessories.
Note
1: It is forbidden to unplug and plug any equipment other than USB and HDMI when power is on
2: Type C interface can be used for the power supply or USB SLAVE interface for burning images.
3: In order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to burn the image.
4: When CM4 is in normal use, it needs to provide 5V 2A power supply for CM4. Otherwise, problems such as automatic shutdown, frequency reduction, etc. may occur.
5: The module does not have any protection, please do not short-circuit the power supply.
6: The USB2.0 interface is disabled by default, you should add line dtoverlay=dwc2,dr_mode=host to the /boot/config.txt file to enable it.
7: This board doesn't support PoE function.
Dimension
CM4-DUAL-CAMERA-BASE
Compute_Module 4 Core board
What's on board
| No. | Component | Description |
| 1 | CM4 soclet | Suitable for all versions of Compute Module 4 |
| 2|HDMI connector | supports 4K 30fps output | |
| 3 | USB 2.0 port | for connecting sorts of USB devices |
| 4 | PWR & USB | USB-C connector, 5V DC power supply or USB programming port |
| 5 | BOOT selection | ON: CM4 will be booted from USB-C interface OFF: CM4 will be booted from eMMC or Micro SD card |
| 6 | CM4 status indicator | PWR: Raspberry Pi power indicator ACT: Raspberry Pi operating status indicator |
| 7 | RJ45 Gigabit Ethernet | 10/100/1000M compatible |
| 8 | Micro SD card slot | for connecting a Micro SD card with pre-burnt image (Lite variant ONLY) |
| 9 | GPIO FFC connector | for expanding 40PIN GPIO |
| 10 | HDMI & PCIe & USB FFC connector | for expanding HDMI1, PCIe, USB |
| 11 | Dual cameras | IMX219, 8MP |
| No. | Component | Description |
| 1 | USB 2.0 port | for connecting sorts of USB devices |
| 2 | HDMI1 connector | supports 4K 30fps output |
| 3 | HDMI & PCIe & USB FFC connector | for expanding HDMI1, PCIe, USB |
| 4 | GPIO FFC connector | for expanding 40PIN GPIO |
| 5 | 40PIN GPIO header | for connecting sorts of Raspberry Pi HATs |
| 6 | M.2 M KEY | for NVME SSD, or communication module with PCIE M.2 M KEY interface |
| 7 | M.2 indicator | indicating operating status of the interface |
