Raspberry Pi PoE/ETH/USB HUB HAT User Guide

Instructions

The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports.

Features

Designed for Raspberry Pi Zero, compatible with Zero series boards
Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
PoE (Power over Ethernet) feature, 802.3af-compliant
Fully isolated SMPS (Switch Mode Power Supply)
3x extended USB ports, compatible with USB 2.0 / 1.1

Specification

POE power input: 37V ~ 57V DC in
Power Output: 5V 2.5A DC out
Network standard: IEEE 802.3af-compliant PoE
Dimensions: 23.10 × 65.00 mm

Hardware connection

Designed For Raspberry Pi Zero, Compatible With Zero / Zero W / Zero WH

Application Example:

Document

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Industrial-grade isolated 4-way RS485 hub repeater One RS485 TO Four RS485 Jetson Nano PWM Fan SpotPear ESP32 Development Board WiFi+Bluetooth Ultra Low Power Dual Core ESP 32S ESP 32 Similar ESP8266 PI5 ABS Case 2.13Inch E-Ink Milk-V RJ45 Raspberry Pi Prism ESP32-S3 Relay 6-Channel IOT WiFi Bluetooth RS485 Pico Protection Circuits Raspberry Pi 5 Pure-Copper Cooler ESP32-C5 WIFI6 Development Board ESP32-C5-WROOM-1 N16R4/N16R8 E-Ink Raspberry Pi HQ Camera Official Original High Quality For M12 Lenses 12.3MP IMX477 Sensor Raspberry Pi LCD Capacitive TouchScreen Display HDMI 6.25inch 720x1560 Raspberry Pi Pico 2 RP2350 1.64 inch AMOLED Development Board Display TouchScreen 280x456 QMI8658 IMU QSPI Step Recording and Reproduction Spotpear ESP32-Hi Mechanical Dog ESP32 C3 Servo AI Voice Chat Development Board Deepseek RS422 to CAN Tutorial