Lichee Tang Nano4K FPGA User Guide

【Introduction】

Tang Nano 4K is a development board designed based on Gowin little-bee GW1NSR-LV4C FPGA chip. The board is equipped with camera interface and HDMI interface. There is also an onboard USG-JTAG debugger, which make it convinent for users to use. Its Cortex-M3 hardcore can help users study mcu.

【Specs】

The sheet below shows difference with previous product

model	Tang Nano	Tang Nano 4K
FPGA chip	GW1N-1-LV	GW1NSR-LV4C
logic units	1152	4608
Register	864	3456
Hard core	none	Coetex m3
Block SRAM(bits)	72K	180K
User flash(bits)	96K	256K
Number of PLL	1	2
Number of I/O Bank	4	4
Number of users I/O	41	44
Screen interface	40P RGB LCD interface	HDMI interface
camera interface	None	DVP interface
Size	58.4mm*21.3mm	60mm*22.86mm

】Pinmap

【Development software】

Visit install ide to setup your programming environment.

【Burn firmware】

Tang Nano 4K uses the onboard BL702 for jtag, with which to burn bitstream.

Run the Programmer in Gowin IDE to download firmware into FPGA.

【Informations】

【Addition】

Visit Tang questions first if you have any trouble.
Debugging Cortex-M3, we suggest to use serial-port debug way. If you are excellent enough you can try other ways to debug it.
THe HDMI ports are multiplexed as IO and routed to the pin headers. The actual results of the IO which are multiplexed with HDMI pins on the pin headers may not be consistent with what you want because of the external pull up.

【Support】

Monday-Friday (9:30-6:30) Saturday (9:30-5:30) -China time
Email: services01@spotpear.com

TAG： Raspberry Pi Camera Case Raspberry Pi PCF8591 expansion board LED GPIO IO test ADC/DCA Sensor Beginner board CAN Analyzer Python UART Communication ESP32-S3 AI Electronic Eye Development Doard DualEye TouchEye 1.28 inch TouchScreen LCD Round Display N16R8 Toy Doll Robot Ra Pi5 Raspberry Pi 5 PD Activation Module ESP32 LVGL Raspberry Pi 5 1.54 inch Passive NFC e-Paper BW Display E-ink Screen No Need Battery Wireless Powered & Data Transfer X1007 Raspberry Pi 5 PCIe to Dual 2.5" SATA HDD/SSD Double-SATA (NOT BOOT From SATA/SSD ESP32 S3 Development Board 2.1 inch Round Rotary Knob LCD Smart Screen 2.1inch Display 480x480 LVGL for Arduino 7inch Monitor Display ESP32-S3 AI Voice Dialogue Robot Mechanical Dog Development Board Toy Tabletop Pet Deepseek Solar Power Manager Module (D) Pi5 XIAO RA4M1 Tiny SuperMini Board For Arduino Uno IDE For SeeedStudio R7FA4M1 Raspberry Pi Zero Pi0 2W Digital Photo Frame 7.3 inch E6 Full Color E Paper Ink Calendar Art Poster Program

Sipeed Lichee Tang Nano 4K FPGA MINI Development Board W1NSR-LV4C GOAI Gowin

[Tutorial Navigation]

【Introduction】

】Pinmap

【Development software】
【Burn firmware】
【Informations】
【Addition】
【Support】