• sales

    +86-0755-88291180

ESP32-S3-LCD-1.85-Battery User Guide

【Resource Overview】



【Xiaozhi uses】

Note: This operation is only required for the first time use, and there is no need to repeat it later.

】Xiaozhi firmware needs to be configured for use

[] After powering on, connect your phone to WIFI: Xiaozhi-xxxx


After the connection is successful, wait for a while and the network configuration page will pop up, automatically searching for hotspots in the current environment



Select your local area network WIFI or mobile hotspot and enter the password (or manually enter the account password above) to complete the network configuration.

(Note: The mobile phone hotspot WIFI frequency band must be 2.4GHz, turn off the mobile phone hotspot for 5G 6G compatibility)

After the network configuration is completed, the screen will obtain the device code.


For devices without a screen: The device code will be announced by voice. Remember the device code announced by voice as it will be used for activation later.

】Click to enter Xiaozhi backstage

[] Click to enter控制台


】Register an account


Telephone area codes for some countries :  

+86 Mainland China、+852 Hong Kong China、+853 Macau China、+886 Taiwan China、+1 United States/Canada、+44 United Kingdom、+33 France、+39 Italy、+49 Germany、+48 Poland、+41 Switzerland、+34 Spain、+60 Malaysia、+61 Australia、+62 Indonesia、+63 Philippines、+64 New Zealand、+65 Singapore、+66 Thailand、+81 Japan、+82 South Korea、+84 Vietnam、+91   India、+92 Pakistan、+234 Nigeria、+880 Bangladesh、+966 Saudi Arabia、+971 United Arab Emirates、+55 Brazil、+52 Mexico、+56 Chile、+54 Argentina、+20 Egypt、+27 South Africa、+254 Kenya、+255 Tanzania。。。。

Other countries are being continuously updated. Go to the website -> console -> mobile phone number drop-down box to view the latest list of supported countries.

】Click Add Device Activation


Enter the device code displayed on the screen (or the voice broadcast device code recorded previously)



Restart the device, wait for the connection, and you can start using it. At this time, you need to press the Boot button to manually wake up and start the conversation. Voice wake-up requires voiceprint recognition


Selecting characters and AI



Click OK, and then power off and restart to take effect.

Unbind device


【Restore factory firmware】

】Firmware Download

ESP32-S3-LCD-1.85-Battery

Download and open the burning software

Burning tool


How to use


Just burn the factory firmware, as shown in the picture


【Xiaozhi Compilation】

Note: Ignore for beginners. Programmers/developers compile tutorial materials

】Compilation environment installation:Download and install ESP-IDF

】Compiled by Xiaozhi

[] Download source code

ESP32-S3-LCD-1.85-Battery


Enter the terminal and open IDF 5.3 or double-click the ESP IDF5.3 Powershell on the desktop

The directory I unzipped is different from yours. Please enter the directory you just unzipped.:

cd F:\project\esp32\ESP32AI\AW1\xiaozhi-esp32-main\xiaozhi-esp32-main


[] Set chip type

Enter the following command again to set the chip to S3

idf.py set-target esp32s3


After Success


[] Change the compiler board type

The default compiled firmware is for breadboard. You need to enter idf.py menuconfig to select the corresponding board model.


Enter 【Xiaozhi Assistant】-》【esp-Sparkle】(press the Enter key on the keyboard to enter the option)




Select the board firmware to be compiled and press the 'S' key on the keyboard to save and then press Esc to exit menuconfig


[] Change the wake word

(It can be changed or not according to the needs)



[] Start Compiling

Enter idf.py build again to compile



[] Start burning

enter:idf.py build flash monitor


Press the Enter button to burn.

Burn successfully, power on again


【Schematic】

ESP32-S3-LCD-1.85-Battery.pdf


TAG: 3.52 inch e-Paper HAT B E Ink Red/Black/White 360x240 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32 Arducam Wiki Raspberry Pi 5 PCIe to USB3.2 Gen1 Hub 5Gbps For Raspberry Pi OS Drive free ESP32-S3 LCD Driver Board RGB/SPI N8R8 For 2.1/2.8/4inch Captive TouchScreen Display Round ESP32 2 inch Capacitive TouchScreen LCD Display ST7789 CST816D 240x320 For Arduino/Raspberry Pi/Pico Raspberry Pi Autofocus Camera RTL8723 WIFI SDIO Expansion Module Board For Luckfox Pico Mini B /Luckfox Pico Plus /Luckfox Pico Pro /Luckfox Pico Max Arduino IR Thermal Imaging Camera Raspberry Pi 5 Night Camera ESP32 D-Robotics RDK X3 Module Core MD Module Horizon Sunrise Pi ARM Cortex-A53 5Tops Size Compatible With Raspberry Pi CM4 Size Raspberry Pi Thermal imaging Raspberry Pi 5 Case Raspberry Pi 5 PD Induction TTL To CAN BPI ESP32 S3 Development Board 2.41 inch AMOLED Display 600x450 TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor 128x128 Raspberry Pi Pico 2 RP2350 1.64 inch AMOLED Development Board Display TouchScreen 280x456 QMI8658 IMU QSPI