3.52 inch e-Paper HAT B E Ink Red/Black/White 360x240 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32

3.52 inch e-Paper HAT B E Ink Red/Black/White 360x240 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32

$11.59

Brand：SpotPear

SKU：0106053

Date：2024-10-10 10:49

Part Number：

3.52inch e-Paper (B) (No PCB Driver Board) 3.52inch e-Paper HAT (B) (With PCB Driver Board)

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

3.52″ E-Paper (B)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Option: No or With Driver Board

Version Options

3.52″ E-Paper (B)
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Note: the driver board is optional, please refer to the Package Content for detailed part list

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Series / RDK X3 / Arduino / STM32)
Optional for e-Paper driver board:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
- Adapting SPI interface for connecting with controller boards like Arduino / STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Black/White
OPERATING VOLTAGE	with driver board: 3.3V/5V	DISPLAY COLOR	Red/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 84.70 × 54.41 × 0.85 (mm)	FULL REFRESH TIME	16s
OUTLINE DIMENSIONS	with driver board: 86.50 x 57.00 (mm)	FULL REFRESH TIME	16s
DISPLAY SIZE	74.51 × 49.67 (mm)	REFRESH POWER	<25mW
DOT PITCH	0.207 × 0.207 (mm)	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	360 × 240 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Similar To The Size Of Raspberry Pi, Compatible With The Size Of Raspberry Pi 5 / 4B / 3B / 3B+

* for reference only, the Raspberry Pi in the picture is NOT included.

Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions

3.52inch e-Paper (B)

3.52inch e-Paper HAT (B)

[] 3.52inch e-Paper (B) (No PCB Driver Board)

[] 3.52inch e-Paper HAT (B) (With PCB Driver Board)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!