Google Chat: zj734465502@gmail.com
+86-0755-88291180
sales01@spotpear.com
dragon_manager@163.com
services01@spotpear.com
manager01@spotpear.com
WhatsApp:13246739196
$72
ESP32-P4 4-inch LCD touchscreen development board 720×720 resolution 170° viewing angle Fully laminated tempered glass panel Onboard dual microphones External speaker Supports Wi-Fi 6 Bluetooth 5 (LE)
This series of products is a dual-core and single-core RISC-V high-performance development board based on the ESP32-P4 chip. It is equipped with a 4-inch 720 × 720 resolution IPS circular touch screen; it supports a variety of human-computer interaction interfaces, including MIPI-CSI (integrated image signal processor ISP), it also supports USB OTG 2.0 HS for high-speed connection, and has an onboard 40PIN GPIO expansion interface, which is compatible with some Raspberry Pi HAT expansion boards to achieve a wider range of application adaptation. The ESP32-P4 chip integrates digital signature peripherals and a dedicated key management unit to ensure the security of data and operations. It is designed for high-performance and high-security applications, and fully meets the higher requirements of embedded applications for human-computer interface support, edge computing capabilities, and IO connection characteristics.
Integrated ESP32-P4NRW32, 32MB NOR Flash
SDIO interface protocol, expansion board Wi-Fi 6, Bluetooth 5 (LE)
15Pin 1.0mm pitch, supports MIPI-2lane camera
Echo cancellation algorithm chip, which can be used to eliminate echo and improve audio acquisition accuracy
USB 2.0 Full Speed interface, can be used for power supply, program burning and debugging
Connect a rechargeable RTC battery (only rechargeable RTC batteries are supported)
Can be used for power supply, program burning and debugging
Power indicator
USB OTG 2.0 High Speed interface
Used to process audio encoding and decoding
PH 2.0 2P connector, supports 8Ω 2W speakers (recommended)
Microphone input and echo cancellation
Connecting to a MIPI 2-lane display
Used to burn firmware to ESP32-C6 modules
Bring out the ESP32-P4 serial port for programming and debugging
2.54mm pitch, pins are compatible with some Raspberry Pi HAT expansion boards (pin header adapter required)
Press when powering on or resetting to enter download mode
SDIO 3.0 interface protocol