Raspberry pi USB-HUB-2IN-4OUT User Guide

Introduction

Industrial Grade USB HUB, Extending 4 x USB 2.0 Ports, Switchable Dual Hosts.

Features

4 x extended USB ports, switchable two inputs, sharing USB devices for two hosts.
Industrial grade HUB chip
ESD protection for each USB port, preventing electric surge damage and data loss.
Over-voltage protection, effectively preventing other high voltage power input from damaging the connected devices.
Multiple protection circuits: over-voltage, over-current, short circuit, over-temperature, reverse current, under-voltage lock-out, 8KV ESD protection, filtering protection, etc.
Industrial grade metal case, rugged & durable, with mounting holes for easy installation.

Hardware Connection

Connect a 5V power adapter to the device, the inside protective circuit will cut off the power if the input voltage is too high.
Four USB output ports, support up to 1.2A current. The short-circuit protection is activated if the current is over 1.2A and you need to remove the device to restore it.
Working temperature range: -40°C ~ 85°C (No condensate).
The LED1 ~ LED4 are the indicators of USB ports, light on if the USB device is connected and success to be enumerated.
PWR is the power indicator.

Question:The LEDx don't light on after connecting devices and the HUB cannot work normally.

Answer:

Please check if you have connected the correct power adapter.
Check whether the USB device was shorted.
Check the USB device first at another PC and check if the related driver was installed.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Camera Raspberry Pi 5 PCIe TO Gigabit ETH USB3.2 HAT+ USB HUB RISC-V 4 inch e Paper HAT+ E Ink Spectra E6 Full-Color 600x400 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32 SC09 Serial UART Bus Servo Motor Switchable 2.3kg 300Angle Jetson 64MP Camera Raspberry Pi 5 User Guide ESP32 1.54inch OLED Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter Board HAT Raspberry Pi 5 Official Original PCIe to M.2 NVMe SSD Raspberry Pi M.2 HAT+ Board For Pi5 OLED-LCD-HAT-A user guide DeepSeek AI Voice Chat ESP32 S3 Development Board 1.83 inch TouchScreen Display 240x284 Raspberry Pi 5/4B not boot To update BootLoader EEPROM Tutorial ESP32 C6 Development Board 1.47 inch LCD Display Screen ST7789 For Arduino WiFi6/LVGL/HMI Onborad SD-Port/RGB-LED Industrial USB TO 8CH TTL Converter USB to UART Multi Protection Circuits Multi Systems X1009 Raspberry Pi 5 PCIe To 5-Port SATA SATA3.0 (NOT BOOT From SATA) Adjustable Focus Industrial Modbus RTU RS485 4-ch Relay With isolation protection and guide rail DeepSeek XiaoZhi AI Chat Robot ESP32-S3 1.54 inch LCD N16R8 MUMA Development Board Display Screen Wifi Weather Station TimeClock ESP32-C6 1.64inch AMOLED Display Development Board 280×456 1.64 inch TouchScreen